I'm not sure how a WDH with chains works but I understand how they work with trunnion bars. I have one with trunnion bars and it took me a few tries to get everything set up properly. You really need to get parked somewhere flat and use a tape measure. The trick is to get the ball set at the...
I can't believe other people haven't said it yet but I think that your trailer is too much for your Expedition. The max tongue weight on your Expedition, I believe, should be about 900 pounds. If that is the case a weight distributing hitch doesn't mean that you can go over that.
I admit that...
I had put an AGM battery in my Explorer and it died 6 months after the 3 year warranty expired. This was from Advance Auto and I don't remember it being an Die Hard battery back then. While the battery was good until it died, when I replaced it I decided the price wasn't worth it for the AGM...
I picked up an '08 King Rach with HD tow package last year. Took it from Pennsylvania to Myrtle Beach and averaged about 17.9 over all for the week. First fill up going south I got 19.1 so I was really happy replacing my '04 Explorer with this. Anyway, towed a pop-up to Orlando then over...
I did a search and read through some threads that I previously hadn't and didn't really find the answer so I'm starting a new one.
2008 King Ranch purchased April last year at 101k and I put about 30k on it so far.
I notice a loud tick when I start the engine cold and then it very quickly goes...
Did you by chance order anything yet? I've placed 2 orders through another company for these in the last 6 months and both times the order was cancelled because they were backordered with no estimate on delivery from the manufacturer. I believe at the time 1aauto did say out of stock but now I...
Sorry for the delay on this. I don't get email alerts. Anyway, I don't remember off the top of my head. If I can remember I'll check and post my findings.
Here's my thought for doing what you want to do. Assuming the blanks are just inserts that can pop out I would find some pushbutton momentary switches and then design a harness to hold the switch and a "cover button" that someone could 3D Print.
You can see what I did at the thread I have linked below. My King Ranch only had the stock CD player in it.
As Yupster Dog stated above, crutchfield is your friend. They will show you what you need to keep your steering wheel controls and whatever else. I do however believe that they say the...
On my 2008 King Ranch the left bank is for the info center or whatever it is called. The one cycles through the options, the other for for settings and the last is reset. The right set is for traction control, hazards, and the last button is the auto-liftgate.
Yes, I just saw about this bulkhead connector in another thread so I have to get it up in the air and inspect it closer before I take action. And of course, now since I can't find that other thread let me ask. Is this just the O-ring on the connector or is it the whole connector that needs...
I'm going to hi-jack this while we are on the subject. I've had my 2008 for right around a year and I'm leaking fluid from the gasket at the rear of the pan. I know these gaskets are reusable and I'm assuming the used car dealer I bought this from or previous owner screwed up tightening the...
Also, If you didn't order anything yet. Be aware that if you can't find the Haloview system that you want on Amazon and you have to order directly from the Haloview website shipper will be around $25 and it will ship from Hong Kong probably by way of DHL. I think I ordered my system on a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.