-
-
RRetiredusps replied to the thread Coil Bolts.i purchased some at bolt depot on the internet, also clips and fastners have a great assortment of auto parts
-
RRetiredusps replied to the thread Missing Engine Cover on 2021 Expedition.Wife bought a stealth 2021 I complained to ford and dealer, All of a sudden ford headquaters told dealer to get one no charge !!! try...
-
RRetiredusps replied to the thread Driving Blind.What year? wifes 2005 has a float in the bottom of tank. Hers was stuck took a long wodden doweland tapped it a few times. it had a lot...
-
RRetiredusps replied to the thread Trailer Brake Controller.Maybe try a local travel trailer Dealer possible they have come across that problem, worth a try !!! or maybe a uhaul dealer
-
RRetiredusps replied to the thread Rusted out brake line blew today.You just do a rough measurement and get 2 lines and a flare union. I didn't try to run where previous line went ran it along outside of...
-
RRetiredusps replied to the thread 2004 shakes violently when braking.Wife's 05 did same thing turned out to be colapsed hose from frame to caliper.replaced both sides fixe I did same thing new pads...
-
RRetiredusps replied to the thread Door handle assembly stripped.I have coated screws with grease then filled hole with epoxy or like, May be able to come apart later maybe not 50/50 chance. worked for...
-
RRetiredusps replied to the thread 2006 RF brake line front crossmember.I purchased 2 lines and a flare union started at wheel and worked forward. estimated length to buyhard part was up by ac. After I was...
-
RRetiredusps replied to the thread Brake problem in 2004 expedition.The flexible line collaspe intrenally but do not leak where you can seei it. usually brake will not release but could also go the other...
-
RRetiredusps replied to the thread Brake problem in 2004 expedition.First off are you losing fluid? check power brake booster. Bleed all 4 wheels. try bleeding left front thru line not thru bleeder.At abs...
-
RRetiredusps replied to the thread Oil Change Gone Bad.I would say you are good to go, so long as the engine never got to have aload on it. I did the same thing at the time my wifes new 05...
-
RRetiredusps replied to the thread no phone, need apim.I didn't know what it was googled it a company called 4dtech has them you have to supply vin and they will program it for you looked...
-
RRetiredusps replied to the thread Supply chain hiccups....i ordered a NEW Rayobest Master cylinder over a month ago still not shipped. Can't even get a new motorcraft no longer made on the...
-
RRetiredusps replied to the thread Tire time....I have had good luck with coopers on and 05, and f150 handle well and tread life seems very good second set on both. good in snow and...
-
-
Loading…
-
Loading…
Members online
- JasonH
- Eric Wheeler
- Knut
- MattG
- Huntsw1
- murrdawg50
- Mothnuts
- Hawkspring
- Tedstech
- sub0cool
- Dobber91
- Ccubed
- smstroben
- bbenz3
- rd618
- Tribe21
- sthomp99
- Vipersinu2
- Deadman
- wakeboarder
- schieberm
- whtbronco
- Evanefi
- pgmeadows
- Oklahoma Jim
- USKflt
- tcpipa
- Ellison Brown III
- Skud
- Dworth
- Eyecando
- Fastcar
- anvarela77
- Nds Thrp
- Eric808
- Distant Traveller
- andtoohey
- NyackRob79
- Jay Mellon
- haviland
- ckaa
- Rob6805
- Dennis_H
- fidget247
- sliderz71
- bsyoung1
- Drive a Golf
- Langer
- Neilatlanta
- Soliyou