Recent content by timberwoof
-
2013 Expedition XLT EL - Loretta
Howdy everybody, sorry its been a while since I've posted or even been on here in a long while. I recently got a Jeep back in April and I've been playing with that more than dealing with the Expedition. I went for a month long training up in Dallas area back at the beginning of October. While...- timberwoof
- Thread
- Replies: 1
- Forum: Member Photos
-
Cylinder #6 misfire
i used a volt meter to check for completion of circuit. When you are looking at the pcm from the front of the engine. The left side connector is the one which has the signal wires which go out to each coil. If you take off the connector and look at the the face of it the top left holes are all...- timberwoof
- Post #13
- Forum: Tech Info
-
Cylinder #6 misfire
Ok big update! Sorry it's been a couple months but I figured out what was wrong. Did this back at the end of November. I pulled out my volt meter and started checking wire to see if I had a short or broken wire in the harness. Well problem was a wire was broken. I don't know how it happened...- timberwoof
- Post #11
- Forum: Tech Info
-
Help
Mine is doing the same thing in Cylinder #6 as well. The Coil code came up so I moved the coil to another cylinder. Same Code same cylinder. Checked the plug and even switched the plug with another cylinder and again, same code same cylinder #6. I replaced the connector to that one coil and...- timberwoof
- Post #15
- Forum: Tech Info
-
Cylinder #6 misfire
Damn I thought I had it fixed after several weeks but, nope. Same code came up. Is there something other than the computer which sends the signal to the coil, telling it to spark. I really don't want to start tracing wire. That is going to be a task.- timberwoof
- Post #8
- Forum: Tech Info
-
Cylinder #6 misfire
These are the two codes I got today. Oops sorry the pic is upside down.- timberwoof
- Post #6
- Forum: Tech Info
-
Cylinder #6 misfire
Ok this is starting to piss me off. I moved the coil to cylinder 1 thinking if it was the coil it wild misfire cylinder 1. Nope still misfire cylinder 6. I replaced the connector because it liked a little black, nope still misfire. Right now I'm waiting for the engine to cool down to pull the...- timberwoof
- Post #4
- Forum: Tech Info
-
Cylinder #6 misfire
Hey guys. I searched a little bit but came up empty. Having a problem and it's a little, but not much, frustrating. Had a bad hesitation about 3 weeks ago and finally had an engine light come on. Said misfire of cylinder #1. It was time for a tune up so I went ahead and did coils and plugs. I've...- timberwoof
- Thread
- Replies: 15
- Forum: Tech Info
-
06 eb rear glass leakin water
I've been having this same problem. I'm gonna go try the pinch weld fix first. The seal on mine doesn't appear to be damaged but it is leaking pretty good.- timberwoof
- Post #11
- Forum: 2nd Gen - 2003 - 2006
-
Lifted Expeditions of EF.com (picture post)
Good Lord that's monsterous.- timberwoof
- Post #198
- Forum: Member Photos
-
Photos of Trailer(s) that you tow with your Expedition
From about a week ago up in Midland TX. She was squatting good.- timberwoof
- Post #63
- Forum: Towing & Hauling
-
-
-
-
07-12 Intake mod - Like Gotts mod but easier & cheaper
Good info- timberwoof
- Post #10
- Forum: 3rd Gen - 2007 - 2017
