Search results

  1. LastExpo2000

    I have a leak, in my T-Case?

    I have a leak towards the end of my transmission, I believe this is the T-Case. The leak is where the drive shaft goes in. I went to a local trans part warehouse and they said there wasn't a gasket for it and to just use silicone. I also called the local part stores and they couldn't find...
  2. LastExpo2000

    A few leveling questions

    I hope some one jumps in Soon!
  3. LastExpo2000

    A few leveling questions

    No worries I'll keep an eye on them. But would 305s be too much? This is with a 2" leveling kit in the back. How much space will I have left in my wheel wells between the tires and top of fender
  4. LastExpo2000

    A few leveling questions

    Would it be a good idea to use some lock tight on the studs before I torque them? I should be able to fit 305s right? I just want to make sure and would that be a tight fit? I'm keeping stock size rims
  5. LastExpo2000

    A few leveling questions

    I was looking at 1.25" 1.50" spacers for front and back. Is that a bad idea?
  6. LastExpo2000

    A few leveling questions

    Okay thanks, I was going to add spacers only to give my expy a wider look. That wont put too much wear on my front and rear end will it? Im going to stick with my stock rims for now
  7. LastExpo2000

    A few leveling questions

    Would 305s fit with a 2" rear spacer? What about wheel spacers?
  8. LastExpo2000

    A few leveling questions

    1) since I have more than a 2" difference in my front end than I have in my rear can I fit 305/70/17 tires on my expy? That if I add a 2" coil spacer in the back.. 2) I was looking into this strutmaster air conversion kit, can anyone tell me about it or recommend something else...
  9. LastExpo2000

    Leveling kits

    but with a 2" leving kit in the back and the great amount of space already in the from, would I have room for 34" tires?
  10. LastExpo2000

    do I need to lift my Expo?

    Where would I get a bottle lift and what is it exactly? Should I replace the shocks too since my vehicle has high mileage? I found 2" polyurethane rear spacers for 70 does anyone know where I can get them cheaper? eBay didn't have anything
  11. LastExpo2000

    do I need to lift my Expo?

    So it's fine to keep my stock shocks? My expy has high highway mileage...and since my front end is 2" or slightly higher I wont have to worry about brake lines or anything? What is the max tire size I could run on that also? Does anyone have a set of directions for te installation? I'm...
  12. LastExpo2000

    do I need to lift my Expo?

    Also would I need to purchase new shocks to make up for the extra length I would be adding or will my stock shocks be alright?
  13. LastExpo2000

    do I need to lift my Expo?

    Also it's fairly easy to put them on?
  14. LastExpo2000

    do I need to lift my Expo?

    You havent gotten any metal on metal rubbing or any clanging?
  15. LastExpo2000

    do I need to lift my Expo?

    I'm having trouble finding 2" coil spacers. Do you have a link and do you know if daystar makes 2"? Also are they fairly simple to install? Can I do this with some jack stands and a hydrolic jack?
  16. LastExpo2000

    do I need to lift my Expo?

    If I bought 2" coil spacers would I need to get bigger shocks? Also about how much clearance would 2" coil spacers give me without a 3" body lift
  17. LastExpo2000

    do I need to lift my Expo?

    If I were to put 2" coil spacers in the back and slightly larger shock all around that would provide me with a lift correct? Ive just been google things and wonder if that sounds accurate
  18. LastExpo2000

    do I need to lift my Expo?

    Because my front end has significant clearance between the wheel well and tire. The back end sets a little lower. I will post pics as soon as I can
  19. LastExpo2000

    do I need to lift my Expo?

    How would I crank my torsion bars? I have them in the front and back?
  20. LastExpo2000

    do I need to lift my Expo?

    I have a place that will do the body lift for 700. What would be a good size tire to put on it? I'm looking for a wider we as well that way I don't need to worry about rims right
  21. LastExpo2000

    do I need to lift my Expo?

    I was wondering if the 33" terra grapplers by nitto will come out from beneath the fenders on my 2000 expy. It's already on a factory lift and I believe the backspacing is 4.5 on it's factory 17" rim. Also if I were to go with those now would the tires look smaller with a 3" body lift
  22. LastExpo2000

    Rotor hole size

    So I'm looking for the rotors that will fit 14mm stud, which means they are 14mm holes?
  23. LastExpo2000

    Rotor hole size

    I have a 2000 exp xlt 4wd and I'm trying to figure out what the hole size is for the front rotors. It's either a 12mm or 14mm stud. The nut sizes are 19mm and I'm not sure what that breaks down to. Has anyone changed their front rotors on a similar year model?
  24. LastExpo2000

    Cat problems

    After a stressful day I finally went to a muffler shop that wasn't tryin to screw me and they said there was nothing wrong. They went a head and did a pressure test and it came out good. They said it was in my head. I have one off topic question. Im going to change my front rotors. Can anyone...
  25. LastExpo2000

    Cat problems

    I don't know how check though without a temp gun. I had equal pressure coming from both my tail pipes.

Latest posts

Members online

No members online now.
Total: 1,580 (members: 0, guests: 1,580)

Forum statistics

Threads
57,013
Posts
535,878
Members
54,708
Latest member
Landsbutter

Share this page

Top