So yes and no - there are 2 brake light switches with multiple circuits - cruise cancel, high mount brake, brake lights, and brake pedal position/pressure switch. I think the lights are on 1 switch and the cruise and position/pressure are on another (i maybe be wrong and it only be one). But my...
Thats nothing neq with mine. You just have to unplug the phone and plug it back in or close the audio application and reopen it - it does it to me in carplay all the time.
Sent from my iPhone using Tapatalk
Yellow is actually better - on the color spectrum for lighting yellow is best and blue or red is the worst. Yellow is better downroad white is my of a bigger area but closer and blue is for upclose
Sent from my iPhone using Tapatalk
You are correct - pin 85 or 86 should have 12v+ and the other should be ground (0v)
Pin 30 (or 87 - however they have it wired from the factory) should have 12v+ and the other in theory shouldn’t be anything (if it doesn’t sense ground through the fuel pump) or 0v (if it does sense ground)
It...
I did with my jeep and it was even a different style (bigger buttons) and it worked ok - different style had some communication glitches occasionally. But worked same distance if not more than the factory.
Sent from my iPhone using Tapatalk
I’ve had a couple issues once or twice.
Once the radio didn’t shut off like it normally does and i had to reopen the drivers door to get it to shut off - only happened once
And apple carplay refused to connect once, disconnected when driving and wouldn’t reconnect- granted my cord was falling...
I have the same lightbar from my jeep. It worked great but I’ve now moved onto the same design 37” nilight light bar that I’m mounting to my roof racks
Sent from my iPhone using Tapatalk
I have never had a problem with auxitos design that i sent. I have put them in other peoples cars and a lot of projector assemblies and they work phenomenally
Sent from my iPhone using Tapatalk
I have a haynes manual with wiring diagrams for 07-17. It’s not completely accurate for me - they changed some things after the redesign in 2015 but i can post pics. What modules are you suspecting?
Sent from my iPhone using Tapatalk
No but i want to buy the projector housings. I’ll include the link for the auxitos that i use. The decoder is basically a resistor that tricks the computer - i needed decoder on my jeep that i had.
AUXITO 9005 H11 LED Headlight... https://www.amazon.com/dp/B088ZT28XY?ref=ppx_pop_mob_ap_share...
I personally use the auxito 9005+h11 kit in my 2017 expy. Auxito has the benefit of slim 1:1 design and no noise interference. Zdatt has a built in decoder and color lenses for different color temperatures but they don’t fit perfectly. Let me know if you need any other suggestions.
Sent from...
What model year do you have? I was able to turn the front and rear hyperflash off in my 2017. I have the forscan spreadsheet for 2015+ if you want it. I also have it for sever different Ford vehicles also.
Sent from my iPhone using Tapatalk
No and I understand that. I only cut and splice so I don’t have to run a wire to the fuse panel. But the socals are great. Synticausa makes a premade one but I haven’t tested and used them enough in my opinion to promote using them.
Sent from my iPhone using Tapatalk
True - the socal ones you don’t either you just have to run the one wire to your running light fuse
And i was suggesting ones that I have had experience using
Sent from my iPhone using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.