Search results

  1. DR3W

    She's dead.

    This mornung my expo is dead, But i didn't leave anything on... Yesterday she ran like a charm. But this morning there was zero power, not even a small light, like i had no battery even in it. I think the alternator went out the other day and i think it slowley drained my battery. So any...
  2. DR3W

    Difference in handling with lift spacers?

    Wait, 4 inches before or after tires? If you lift the front 4 inches (Before tires) than i'd do a 3' spacer, because it would look better. But of course the 2' spacers will handle a little better because it puts your center of gravity higher but there isn't really that much of a difference...
  3. DR3W

    Hub Assembly 12mm or 14mm?

    I have the same quetion! haha Im unsure but i think the 4x2 is 12mm and 4x4 is 14mm. But thats my commplete guess! haha I have no idea. 2000 4x2 xlt 4.6L 170k miles
  4. DR3W

    How high should I go?

    Yeah ORW is really good too.
  5. DR3W

    How high should I go?

    Or visit a 4 wheel parts store, they'll hook you up with whatever you need. :)
  6. DR3W

    Tranny rebuild cost.

    Same that and a muffler are my next buys, probably the cs but i'd love the cts too! haha
  7. DR3W

    How are these pro comp tires?

    Okay thanks guys, i think i'll get these. In 33's when i get my lift on there. :) Umm yeah, i got my frame fixed. A buddy od mine at a collision center gave me a good deal and frame is nice and aquared away. And on my way home from picking it up, my tranny goes out. So yeah, at shop again...
  8. DR3W

    How are these pro comp tires?

    Hey guys, im looking at new 33's. How are the Pro Comp Xtreme All Terrain Radials. I want the real agressive AT look. But how are they on the road. I do very minimal off roading. Any help will be great, thanks. :) 2000 4x2 xlt 4.6L 170k miles
  9. DR3W

    4X2 w/ load leveling lift question

    A good way to got for a 4x2 is the fabtsch 3.5' front spindle lift, and get rear coil spacers. Either 2' or 3'. Along with new shocks, that'll fit 33 very well. Over all that would raise the front about 5 inces & rear about 3-4 inches. The difference between a stock 4x2 & stock 4x4 is only like...
  10. DR3W

    Tranny rebuild cost.

    Okay yeah thanks guys, friend who owns an engine shop said its a pretty good price. Should have it back in a week. Thanks. Hey haha, im getting the same lift as RACENUT i think. 3.5 fornt fabtech spindles & rear spacers on 33's? :) 2000 xlt 4x2 4.6L 170k miles
  11. DR3W

    Tranny rebuild cost.

    Just got my expo back from frame shop. But now, it wont shift into 3rd gear. Engine just revs inbetween 2nd & 3rd gear. It wont choose a gear when accelerating from around 35mph until about 5-15 seconds. My mechanic said i need to replace the torque converter, it needs a master kit, and some...
  12. DR3W

    P0781 - 4r100 - delayed or no 2nd gear

    So you manualy shift from D-2-D???
  13. DR3W

    P0781 - 4r100 - delayed or no 2nd gear

    Idk if were having the same problem but mine just started this. It wont go into 3rd. Around 35-50mph, expecting it to shift around 2000-3000 rpm. It just keeps reving but wont shift until about5-10 seconds than shifts violently. Only today has it started, idk either! 2000 xlt 4x2...
  14. DR3W

    Wont shift into 3rd.

    Hey guys, just got car back from frame shop. While driving it back, after about 30 miles. I tried speeding up from about 35mph to 50ish but engine kept reving. Between 3000-5000 rpm when just cruising. Like it wouldn't shift into next gear. But eventually did, violently after about 5-10 seconds...
  15. DR3W

    Wont shift into 3rd.

    Hey guys, just got car back from frame shop. While driving it back, after about 30 miles. I tried speeding up from about 35 to 50ish but engine keft reving. Between 3000-5000 rpm when just cruising. Like it wouldn't shift into next gear. But eventually did, violently after about 5-10 seconds...
  16. DR3W

    What will i nee. To run 33s or 35s

    No body lift, well not left. Just 3.5 in the front & 2 in the back on 33's. Im getting my baby back tomorrow. Then i'll put all this on in a few weeks :) I got an estimate from 4 wheel parts for like $2400 for everything. Rims, tires, lift, and shocks, etc. :) Good luck man, keep us posted.
  17. DR3W

    What will i nee. To run 33s or 35s

    I probably could fit 35's with minimal trimming and slight rubbing. But i want the 33's for better mileage & flex room off road. Ummmmm haha whats a bl? :)
  18. DR3W

    Dick Cepek Radial FC-II

    I wana get these tires for my everyday truck. How are they, i've never seen any on the road so i'm wondering cuz they're pretty expensive. Just wana know how perform & how safe they are? Anything will help. Thanks :)
  19. DR3W

    What will i nee. To run 33s or 35s

    Here are the spindles im getting. I'd go with a known brand for spindles. Dont want any cheap ones there! ahahaha http://www.4wheelparts.com/Lift-Kits-Suspensions-and-Shocks/Fabtech-Lift-Spindle.aspx?t_c=1&t_s=399&t_pt=4914&t_pl=101536&t_pn=FABFTS97159-7 And im getting the Daystar rear 2'...
  20. DR3W

    What will i nee. To run 33s or 35s

    Exactally what im gunna do in the next few weeks. I get my expo back in a few days :) 2000 xlt 4X2 4.6L
  21. DR3W

    How high should I go?

    Almost positive you'll need new shocks. Well at least in the back. haha But to compensate for the slightly bigger tires. I'd definitally reccomend new shocks. Im getting the Pro Comp ES1000 when i lift mine 3.5 in front w/ 2' rear spacer on 285/75/17, I think a set of 4 is like $100. I'd...
  22. DR3W

    Rear coil spacer install.

    Oh ahaha, ya. Just wondering if its the same on both sides. aha Thanks man ahaha. By the way, you have one of the sickest trucks here! ahaha
  23. DR3W

    Rear coil spacer install.

    How are rear coil spacers installed. Planning on the Daystar 2' when i get my truck back from shop. Is the spacer on top or bottom of the spring? Just wondering. haha THanks. 2000 xlt 4x2 4.6L
  24. DR3W

    expy getting stripped

    Luuuucccckkkyyyy! ahahaha
  25. DR3W

    Help with front suspension

    Ummm, maybe try new bearings. Or steering linkage could be loose. Idk, hard to tell without hearing or seeing it in person. haha Or the a-arms...no. This is pretty puzzling. Good luck man, try having someone drive it while you listen outside it. Hope this helped at all. :) 2000 4x2 xlt 4.6L

Latest posts

Members online

Total: 2,690 (members: 4, guests: 2,686)

Forum statistics

Threads
57,016
Posts
535,899
Members
54,713
Latest member
Budman55

Share this page

Top