Search results

  1. tonydiv

    4-Wheel drive upgrades.

    If you want to put an upgraded diff in the front, your choices are limited to selectable lockers, like arb, e-locker, etc. No other manufacturer recommends putting their unit in the front of the truck. The trucks with a 2wd option have a front axle disconnect. But the issue is that it only...
  2. tonydiv

    Interior Bulbs

    Most of them are 194's but the dome lights are festoon style. This guide can be helpful Lamp Replacement Guide Home A great place to get replacement leds is superbriteleds.com
  3. tonydiv

    Upgraded my Running board lights

    Those light fixtures aren't completely waterproof. Some silicone grease will keep the led base wires from rusting.
  4. tonydiv

    Custom Front bumper ????

    Mine was from Tactical Armor Group. It starts at about $600. Mine was $1010 with options and shipping from Atlanta to Cleveland. The thing is, if you make a fiberglass bumper, you're essentially running with out a front bumper at all. Not the safest thing to do on public streets. If you...
  5. tonydiv

    Running Board Lights Stay On (Specific Question)

    Do the interior lights stay on too? Because it sure sounds like you have a bad door switch.
  6. tonydiv

    Custom Front bumper ????

    Most of us want our bumpers to be tough and safe.... something that a fiberglass one just isn't.
  7. tonydiv

    Found where noise was coming from.

    Energy. Just don't over tighten them. The washers can bite through the urethane and destroy themselves very quickly. While you're at it, you should check all the rear linkage bushings. Energy makes urethane replacement for all of them.
  8. tonydiv

    tire balancing

    I used that commercial balancing bead product.... in a word SUCKS. There were times that the tires just wouldn't seem to balance out. I would never use it again.
  9. tonydiv

    Rear End Vibration???

    Have you had the wheel balance checked on the rear end? Also are your wheels hub-centric? (does the hole in the center ride on the lip on the axle) What is the condition are the rear shocks, bushings, etc in? Changing the gear oil can't hurt, but I seriously doubt that is going to fix your...
  10. tonydiv

    Running Board bulbs

    Most auto parts stores have an led replacement bulb. Looks cooler lasts forever. Also you may want to head over to the hardware store and pick up some of those plastic expansion rivets that hold the backing covers on the running boards. I destroyed mine the first time I replaced the bulbs.
  11. tonydiv

    37s ?

    My truck had the Rancho 4" lift and a 3" body lift. I had plenty of room for 37s. The pic in the sig is with 35s.
  12. tonydiv

    Did anybody tried Pyle 25" Overhead DVD unit?

    I just installed one in my buddy's Astro van. It's a decent unit, built in sound sucks, and the fm transmitter is a joke, so you need to use the line out to an aux input on the head unit. We haven't tried it with headphones yet, so I can't say how that works. It's not that heavy, but you...
  13. tonydiv

    1st Gen 2nd Row Bench to Buckets

    My truck had them, but it was done by the original owner. The seats had the 'Limited' script embroidered in to them, so I assume that they came from an F150 super crew. They didn't fold flat forward, so they probably weren't from an excursion. It didn't look like any of the mounting holes...
  14. tonydiv

    No Ashtrays in my 05 EB Expy

    Starting in 2000, you actually got the cigarette lighter outlet, with a plastic plug. The actual lighter came with the 'ash cup' . In some of their vehicles, Ford just took the ash trays and lined them with fabric and deleted the lighter element, until they could redesign the dash.
  15. tonydiv

    More than one Throttle Body spacer?

    That aftermarket throttle body may need the spacer as an adapter. Is it bigger than stock?
  16. tonydiv

    More than one Throttle Body spacer?

    Who said that one was good? I don't know anyone who actually noticed a difference after installing one.
  17. tonydiv

    Blinker is really fast!

    Just get a 'zero load' flasher from a place like superbriteleds.com. It's the correct way to run led signal bulbs.
  18. tonydiv

    Gumout for MAF Senor and Throttle Body?

    +1 on that
  19. tonydiv

    saw this stuff

    Lizard skin LizardSkin® Spray-On Insulation | LizardSkin
  20. tonydiv

    1st gen door trim inserts?

    I removed the crappy chrome insert on the molding and replaced it with vinyl tape stripe from West Marine. You could do the same using some of that new printed duck tape (available in camo).
  21. tonydiv

    disable the dome lights?

    Do a search, a few people have installed an override switch on the dome lights.
  22. tonydiv

    lift kit

    We need WAY more information. What size tire do you want to run? How high? Do you actually take the truck off road? How much money do you want to spend? Do you have the equipment and skill to do it yourself?
  23. tonydiv

    Spare key and fob stolen

    I'm pretty sure that if you program your existing and new keys and fobs, that the lost key and fob will no longer work. It won't keep them from using the key in the door to gain entry, but it won't start.
  24. tonydiv

    Body lift questions

    Isn't there also a steering shaft adapter for the 3" lift? Can't remember. Also +1 on the gap guards, it looks terrible without them.
  25. tonydiv

    Front DS - Removal

    You can use a pipe wrench to hold the driveshaft, but you need to place it at either end of the shaft right where the welds are. If you put it in the center, you can dent it and/or put it out of balance. Remember to put marks on the driveshaft and the flanges so that it lines up the same way...

Latest posts

Members online

Total: 2,827 (members: 8, guests: 2,819)

Forum statistics

Threads
57,016
Posts
535,899
Members
54,713
Latest member
Budman55

Share this page

Top