I checked each fuse under the hood and the fuses under the steering wheel.
I took every fuse out and made a "visible" control...
I read about the DSM (when equiped with memory seat), that there can be a problem also?
Can i read out the error codes with Forscan?
hi
i have a new problem on my 98 Navigator
Today i realized that the power mirrors and the driver seat wont work.
I checked all the fuses, they are all good. Everything else is working fine.
Some days ago, i hade some water leaking from the sunroof. Now it's all dry.
There is also the driver...
Resolved the problem!
The problem were that the torsion bars were to high, so the rear end was too high..
Screwed the torsion bars "lower" and the suspension light stays of...
Thank you!
The codes are comming from an Android-Tool... i know, i have to check with another OBD software...
The suspension seems to work well, only the dash-light will come on after about 10-15 minutes driving...
i found that error P092B: "Gear shift lock selenoid/Actuator control circuit "B" range"
We...
Hi
Can somebody say me, what these codes mean? (I have the "check suspension light coming on after 10 Minutes)
C08<D
B2TAE
ROR
P092B
DAT
B2ERR
C03<D
B04<D
Thank you!
I am searching for rims for an 98 Navigator, no BlingBling...
I would take also used ones...
My preferedstyle is something linke that: 17x9 Black Wheel Pacer Black Daytona 5x135 FORD f150 - Rims - Black Daytona - Black - 5x135 - - 9 - 87.00 - 0
or that: 17x8 Teflon Wheel American Racing...
Sorry for my late response...
I've ordered now all the parts... Cost of the support is 130£, shipping about 500£...
I had to order also the brake calipers for the front, both sides...
I'll make some pictures this afternon.
Perhaps they would be helpull fore some people, to look after this...
Hi
In my 98 Navigator the front bodymounting points are rusted on frame...they're gone...
Does anyone know where I can get a complete front end, which can be delivered to Switzerland?
Or are there reparation parts? Is that called "radiator support" or whats the name of that part?
Edit: Is thet...
Mine had this problem also... No codes were in...
Therefore i changed all the plugs and coils and the problem was solved...
Yeah. It's frustrating when there is a problem an you can't localize..
I have done this work 5 Weeks ago...leaking on each side and some bolts were broken
I had to heat each bolt and spent much time on each...
Two of them i had to drill out.
I also had to lift the engine because there was not enough space to take the header off...
The most common reasone for a poor headlight is because there is not the full power of 12V on the bulb , caused by bad wiring, bad cables...
Here is my part...
Material needed:
4 Relays (30 A - 40 A)
4 Fuse holders
4 Fuses (10 A)
16 Pinch connector 6, 3 mm, approx. 10 connector, 2 round...
Think this is the selenoid from the compressor. Had this also on mine...
You can order this as one seperatepart and fix it.
You can proof it with 12V directly on the compressor. If it clutches in, its ok, other problem. If it clutches not in, you've found the problem....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.