I would like the 3rd row seats to be able to stop in any position.
Sometimes I would like to stop half way down position to close the tailgate.
Insead i have to put the seat all the way down, then crap is sliding all around.
The carpet on the back of the 3rd seating sucks.
It is horrible to...
I am a mechanically inclined and would of did the job myself. But the truck was under warranty.
I can say the stealership did a good job.
I looked for loose or missing bolts.
I talked to the tech, and they do these all week long.
Like second nature to them by now.
Take it in and get it fixed.
No Tsp will not fix that knock is bad.
My jaw dropped when I heard that.
That is really bad knock.
I heard the cam phaser rattle, and go away when oil pressure was built up.
I hear the wastegate rattle clearly.
Man that knock is horrible.
Beware.
You wonder if that knock is the sway bar. This seems like a horrible design.
It is metal on metal. I never seen that before. The swaybar is always sandwiched between bushings.
I brought the truck in for sunroof rattel.
I asked if there was a way to permanently stop the rattle, instead of greasing the gasket every few months.
Both service advisors that were in the office, chuckled and said "we would never buy a ford with a sunroof"
That was their way of saying, they...
I did not notice a service light,
I olny had it unplug for less that 60 seconds.
It was only the driver side that the dealer replaced.
Pretty soon the passenger will need to be replaced. It is starting to rattle.
Amen,
I have drilled out to many exhaust studs, and spark plugs on the 3v. I have replaced 2 engines on the 4.0 sohc b/c of shit timing chane design.
Ford had always have the truck, but there engines are the weak point.
It is probably designed to fail at a certain point to keep the economy...
What i did on my mountaineer
I got scented bleach water mixed in a pump sprayer.
I found the ac drain line under the truck. I put the wand in the drain hose and pumped in the beach.
I started the truck with the technician and service manager in the service bay.
I reved up truck, the tech heard the rattel.
I had him unplug the electrical connector to the wastegate. And rattel was gone. The tech was shocked, a turbo with such low miles was bad.
Before that I was explaing...
any Idea's how to clean off the old adhesive and what type of adhesive should I use to re-attach trim piece?
I was thinking nail polish remover,
And then attach with clear silicone.
Ya I hear you there.
if you do get a new turbo, check your fluids before you take it in for repair. Then check oil and antifreeze before you pick it up. My truck was 1.5 quarts low on oil after the turbo change, the dealer never filled the oil back up that leaked out.
i just check the parts diagram. that is the correct set up.
This seems like a bad design. one would thing, when the bushing start to wear out and there is some play in the swaybar link, the nut is going to rattel badley on the swaybar. I never seen a set up like this before. seems like a realy...
Take it in for a new turbo, That is the same noise my wategate was making,
if they put up a fight, Have them unplug the wastgate electrial connector and rev it up. the noise will dissapear. plug the electrical connector back into the wastegate and the noise will be back. proving that the...
I will try and give that a shot
I will move the dial to fresh air b4 I shut off the truck.
My truck stinkes just like vinegar for the first 2 mins.
I hate it
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.