Search results

  1. JTKustoms

    Crash! EOTM September submission...

    Very unique, I like it a lot
  2. JTKustoms

    Ford expedition thunder svt

    I really wish they built the thunder. The lightning is one of my favorite vehicles of all time, so if they put that into an expedition it would be awesome.
  3. JTKustoms

    iPad Mini indash 97 expedition

    Mine doesn't have a charger because I take it out to use it all the time anyways. So unless its gonna be dedicated strictly for the truck then I wouldn't worry about a charger. Looks great though so far
  4. JTKustoms

    99XLT - Build Thread (many pictures)

    Awesome build man, first off those headlights are awesome. And the homemade raptor grille is crazy, really like that a lot. Can't wait to see more
  5. JTKustoms

    iPad Mini indash 97 expedition

    Good luck with it man, can't wait to see it. You're doing it exactly how I did, just kinda figuring it out as you go. Any questions feel free to ask
  6. JTKustoms

    Lowering the front

    As was said above, you can just loosen the torsion bar adjustment bolts to lower it slightly. You should have an inch or two of adjustment from that
  7. JTKustoms

    iPad Mini indash 97 expedition

    Take a look at my albums, I did an iPad 2 in my truck last year and relocated my double din to the same location that you are. My ac controls are tucked back behind the iPad since I don't use them often and popping the iPad panel out to access them takes all of 3 seconds
  8. JTKustoms

    Brakes

    Hey guys so I'm getting my truck back out for the summer, been neglecting her since I bought a challenger. So my brakes are extremely bad from driving on 26's, front pads are almost totally gone if not already gone. Does anyone have any experience or tips about replacing them? Doesn't look to be...
  9. JTKustoms

    Strobes

    I have 10 hide-a-ways in mine. 2 in fogs, 2 in corners, 2 in reverse lights, 2 in 3rd brake light, 2 in 3rd row cup holders (I ran out of places to put them lol)
  10. JTKustoms

    Adjusting the headlights on a 98

    The headlights should mount with those three threaded studs, on those studs you'll have the plastic nut type thing that the clips grab on to. To adjust up and down you just twist those accordingly to angle the light
  11. JTKustoms

    Painted the Bumpers

    I've seen the gloss before and really wasn't super impressed with it. Kinda made the paint look more greasy than really a gloss
  12. JTKustoms

    Painted the Bumpers

    Was I the bad influence behind this lol
  13. JTKustoms

    Gen 1 XLT dual din fit?

    It's very possible, just needs some minor trimming. I just sat there with a dremel until I got it right
  14. JTKustoms

    Took plastidip to a new level

    Mine are in pretty good shape so i just tire shine them and leave them alone, they'll stay very glossy with that stuff. Plus its funny watching unsuspecting passengers step on them and nearly slip and fall off the truck
  15. JTKustoms

    Took plastidip to a new level

    That's why I'm kinda 50/50 on if I should take them off. I always tire shine them and they have blue LEDs for the courtesy lights so I think they look nice being on there. But at the same time it would be a clean look without them
  16. JTKustoms

    Took plastidip to a new level

    Thanks man, and I plan on sending him pics once I finish the rims and get them on the truck. I find it really funny how their wheel kit is 4 spray cans....to do my wheels I needed 13 cans. And yup no booth, just a 70 degree day with no wind, the sprayer was a cheap Earlax gun that came with the...
  17. JTKustoms

    Took plastidip to a new level

    Considering it for this year, nobody uses them anyways ever since I lowered it. I'm just more concerned about having the frame rails or some other rusty ugly object being visible
  18. JTKustoms

    Looking for smoked tailight for 3rd gen, cant find anywhere HELP!!!

    Welcome to the forum, let us know if you have any questions
  19. JTKustoms

    Took plastidip to a new level

    So I spoke to a guy I know who had a shop dip his f350 in the winter. He said he had them dip the running boards as a test and he planned on keeping track of how many times he stepped on them until he wore through it. The final amount of times stepped on until failure was 132....so yes it's...
  20. JTKustoms

    Took plastidip to a new level

    i think black bumpers will looks awesome on your truck
  21. JTKustoms

    Took plastidip to a new level

    Yeah did the roof too, had to open the back doors and stand in there to reach all of it but it got done
  22. JTKustoms

    Took plastidip to a new level

    The running boards? i didnt try to paint those and i had started peeling them in these pics so don't base the decision off of me. Any white you see on them is basically overspray, not a real buildup of paint. But literally all you do to clean this stuff is pressure wash it and everything comes...
  23. JTKustoms

    Took plastidip to a new level

  24. JTKustoms

    Taillight Tinting

    I've done a few sets for people and have had great results, i'll list off my steps: 1) wetsand light with 2000 grit so dull it slightly 2) clean with dish soap to degrease them 3) apply multiple light coats until you reach the desired darkness 4) apply multiple coats of clear (majority of which...
  25. JTKustoms

    Took plastidip to a new level

    Hey guys, haven't been too active on here lately since I got a '12 challenger and have had the expo sitting for a while. But the time came over the weekend to finally execute the plan I had since the fall....to plastidip the entire truck. You may have heard of dipyourcar.com or seen their...

Latest posts

Members online

Total: 2,308 (members: 16, guests: 2,292)

Forum statistics

Threads
57,010
Posts
535,856
Members
54,702
Latest member
Desert Rat

Share this page

Top