I have an 07 Expedition with 147k miles on it. While replacing a bad rear caliper I could not get the brakes bled. I tried bleeding each caliper and master cylinder multiple times but no matter what, after a few miles of driving the brake pedal would fall to the floor and I had to stand on the...
Thanks fellas. Got the truck back last Friday. Turned out the fusible links between the generator and starter motor we burnt up. Replaced them and it fired up and has been running like nothing ever happened. Lesson learned... Thanks for the help. I appreciate it.
Ok went back out there today. Hooked up my scanner tool and it couldn't read Ecu. I'm thinking Ecu may be bad. Can someone tell me what needs to be done if I swap out ecu's with a known good one. Do I have to program the Ecu or keys? Please any help is appreciated.
Thanks for the help guys. Didn't get a chance to go out there until yesterday. Changed a few fuses in the under hood panel and the interior and no change. I'm not sure what what else to look for. As I mentioned the starter turned the motor over with a screwdriver. Would the Ecu be bad if...
I think I have most of what I need to go back out there to try to get it started. I have a complete under hood fuse panel coming in, multiple smaller fuses and tester for interior panel and a replacement 5 pin relay for the interior panel as well. I'm also taking a good battery and volt meter...
Thank you. I should have mentioned we tried multiple times to charge the battery. First we used a generator, then my friends tundra. Nothing. I will also say that all the lights in the cab still work, windows go up and down etc... Furthermore,
I got under the truck and manually hit the...
I made a silly mistake yesterday when trying to charge my brothers atv battery. I crossed the pos and neg cables on the atv battery. The truck was running when this happened and it took me about 5-10 seconds before realizing what I did. Truck stayed running so I switched the cables back and...
Had this same issue with jerking/hesitation. Dealer told me all COPS were bad except for #5. They changed these out on warranty. They suggested replacing the plugs too but at $400 bucks I am going to do it myself this weekend using an impact and some pb blaster. Anyhow, the jerking issues...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.