Search results

  1. taylor slusher

    Just pics

  2. taylor slusher

    Just pics

  3. taylor slusher

    Update on FX4

  4. taylor slusher

    Update on FX4

    Haven’t been on here in awhile so I’ll post some updated
  5. taylor slusher

    4x4 test

    Can’t upload videos but I have one going up a hill near vertical with ruts and gravel throughout
  6. taylor slusher

    4x4 test

    I’m not so lucky just was making sure I didn’t have anything binding or scrubbing
  7. taylor slusher

    4x4 test

    No mods on engine Exhaust has muffler delete
  8. taylor slusher

    4x4 test

    Yes with a little teeter lkl
  9. taylor slusher

    4x4 test

    Stock wheels sprayed black with center caps chrome Suspension is factory FX4 package with 2.25 strut spacers (RBP) for a f150 on front and rear Tires hankook dynapro ATM 285/70/16
  10. taylor slusher

    4x4 test

    A little test of the spacers
  11. taylor slusher

    Update on FX4

    I custom made rgb led strobe Remote controlled strobe lights In grill area, For show of course Also added leveling kit Going to change rear shocks next as they are sagging due to pulling a dump trailer most of its life
  12. taylor slusher

    P0175 issues

    All vacuum lines replaced Fuel filter Air filter Cleaned MAF Cleaned Throtle body So far so good
  13. taylor slusher

    P0175 issues

    jumped in my 2v gen 2 after work and drove fine for a mile then all the sudden it bogged down at 1000-1600 rpm but gets better as the tach rises I’ve located a small vacuum leak but I don’t believe that is the issue, I bought the elbow to replace it but I’m at work right now so I can’t do...
  14. taylor slusher

    5.4l 2v 247k miles 03 fx4

    From what I understand the previous owner just had the pump replaced. But I didn’t see a receipt so I’m assuming it wasn’t or is a cheap pump
  15. taylor slusher

    Nice to meet Everyone Thanks for having me here

    ++
  16. taylor slusher

    Nice to meet Everyone Thanks for having me here

    Update Thanks everyone for the warm welcoming Finished the UCA yesterday after having to go get a refund at advance for them having a shipping mixup or something Went and picked it up at casquest No issues out of install wasn’t as hard as I made it out to be a first. Anyways I’ve added a...
  17. taylor slusher

    5.4l 2v 247k miles 03 fx4

    Ok so I’d like to see if anyone has any insight on a few issues, well not really issues motor runs fine. I am just OCD if it can be fixed before it becomes a problem do it right? 1) I’ve got a CEL for my fuel pump I forget the actual code as I don’t have the scanner with me at the moment. I...
  18. taylor slusher

    End of the line for our 2003

    Sorry to hear that brother My 03 fx4 240k miles and still pulling hard
  19. taylor slusher

    03 fx4 UCA replacement

    Also wanted to make sure I could get the job done and end up with bolts stuck or something sheered off or broken. Being it’s the first time I’ve ever done any suspension work.
  20. taylor slusher

    03 fx4 UCA replacement

    The front lowers are good. The passenger upper needs to be changed but not as bad as driver side. The rear lower will have to be changed soon as I thought the noise was coming from rear end but you’ve pretty much Summed it up for me it’s a click only when I turn but not every time.
  21. taylor slusher

    03 fx4 UCA replacement

    I never actually removed the strut assembly out of its pocket but I did have to remove 3 15mm bolts on top of the strut and one 30mm nut with a 27mm bolt. Inturn sliding the bottom out of the LCA and getting enough room to wiggle the UCAs 21mm bolt through the hole. I just finished it up after...
  22. taylor slusher

    03 fx4 UCA replacement

    I didn’t. It’s old and wore out
  23. taylor slusher

    03 fx4 UCA replacement

    Hate to do them one at a time but money is tight right now and this one was shot
  24. taylor slusher

    Nice to meet Everyone Thanks for having me here

    Update: Replacing UCAs due to ball joint failure/ bad bushings. Sucks to only have the cash to spare for one side right now but at least I know how to do the other side now! Anyone local in Nw Georgia have any strut spacers/leveling kits for sale
  25. taylor slusher

    Nice to meet Everyone Thanks for having me here

    Thanks it’s a work in progress, slowly but surely.

Latest posts

Staff online

Members online

Total: 3,041 (members: 14, guests: 3,027)

Forum statistics

Threads
57,617
Posts
536,360
Members
54,668
Latest member
giogabo

Share this page

Top