P0175 issues

[taylor slusher]

jumped in my 2v gen 2 after work and drove fine for a mile then all the sudden it bogged down at 1000-1600 rpm but gets better as the tach rises

I’ve located a small vacuum leak but I don’t believe that is the issue, I bought the elbow to replace it but I’m at work right now so I can’t do anything

Any suggestions

 

[Hamfisted]

Smoke check the intake system just to make sure that's the only vacuum leak.




https://www.ebay.com/itm/EVAP-Smoke...DE/282241437563?hash=item41b6e68f7b:rk:1:pf:0

 

[taylor slusher]

All vacuum lines replaced
Fuel filter
Air filter
Cleaned MAF
Cleaned Throtle body


So far so good