Search results

  1. Jigstick

    4x4 always engaged?

    My understanding is that should not be happening. If your IWE system is functioning properly…with the engine on…vacuum being delivered…your IWEs should be unlocked and the shafts shouldn’t be spinning.
  2. Jigstick

    2018 IWE 4WD hub issue

    Noticed some humming coming from the front end. Checked the wheel bearings and the usual culprits which were all normal. This lead me to check out the IWE system. I checked both front IWEs with my suction pump and both hold pressure and disengage appropriately. So those seem good. Next I...
  3. Jigstick

    Odd rattle coming from roof

    Ive noticed an annoying rattle coming from the passenger side roof area. My best guess is that it is coming from the roof rack runners. Ive had to take my crossbars off in order to fit in certain parking garages. Maybe removing the crossbars is now causing the runners to rattle somehow? Is...
  4. Jigstick

    Field service 21N03

    I had my computer flashed yesterday. 2018 with 50k miles on it. I still get the rattle on start up. My dealer said they will now replace the cam phasers under the field service report. Question though....is the rattle coming from the actual cam phasers or the timing chain? Certainly sounds...
  5. Jigstick

    Power running board maintenance

    I have my trucks undercarriage sprayed with fluid Film every year. And have them hit up the running board hinges. Going on 3 years and no issues at all.
  6. Jigstick

    Another Cam phaser question...

    That’s what they told me as well. Letters being sent out end of sept. So we should all get something from Ford directly.
  7. Jigstick

    4th Gen Brakes Q&A

    Finished my install yesterday. The rear caliper brackets don’t need removed to replace the rotors which was nice. These ceramic pads don’t feel as grippy as the OEM pads. But I haven’t worn them in yet. Time will tell. Overall an easy install. Just remember to put the truck in Brake...
  8. Jigstick

    Bilstein 5100 Lift Install

    What about rear ended squat? I’m having my shocks done soon. Going with factory ride height. But I’m curious if these Bilsteins will change the hitch drop I need when towing. My boat is 8500#s
  9. Jigstick

    Bilstein 5100 Lift Install

    Does installing these Bilstein 5100 Expedition shocks alter the max towing capabilities on Expys with the heavy duty towing package?
  10. Jigstick

    4th Gen Brakes Q&A

    I’m doing front and rear rotors and pads on Friday on my 2017. Rear pads are toast at 47k. Fronts about 50% but got scoring on the inner rotor walls. I went with Advanced Auto Platinum rotors and ceramic pads.
  11. Jigstick

    2018!Failed right front wheel bearing

    Both my front wheel bearings crapped the bed at 45k. Now at 47k and all 4 struts **** the bed too.
  12. Jigstick

    Field service 21N03

    21N08 says if you have the 21B10 reprogram...and you develop engine shudder or transmission shifting issues Ford will revert the PCM reprogram back to "original settings" at no charge to the customer. Only then will my ford dealer replace the cam phasers.
  13. Jigstick

    Drive Modes vs CCD Suspension

    gotcha. These Bilstein shocks arent compatible with CCD. Just making sure that my vehicle doesnt have it. And now I have a better understanding of what my drive modes do.
  14. Jigstick

    Another Cam phaser question...

    FWIW I was at my dealer today regarding 21-2119 TSB. Asking to my have my cam phasers replaced. I was told that a new update was released yesterday Sept 13, 2021 regarding the cam phasers. Ford is now reverting back to having the PCM reprogrammed. If any transmission issues arise after the...
  15. Jigstick

    Drive Modes vs CCD Suspension

    Im a little confused regarding these two systems on my 2018 Expy Max Limited. I have the 301A trim package. Im in the process of replacing all the garbage factory struts at 47k. I was about to order some Bilstein 5100s when I noticed those shocks dont work on vehicles equipped with CCD. I...
  16. Jigstick

    Splash / mud guards

    love mine. Heres mine with just the rears on. took it for a spin to make sure they didn't add any noise to the ride before I put the fronts on. I love then. They really add to the truck.
  17. Jigstick

    PM on deployable running boards

    Im spraying all the components of my flip downs with Fluid Film to try and keep the corrosion down.
  18. Jigstick

    What oil and Filter combo in the new Ecoboost

    Schaeffers Supreme 9000 Full Synthetic has by far been the best oil I've used in our cars. My wifes 2012 Explorer, two chevy tahoes, an F150, a Ram 1500. And now in our 2018 Expy. Nothing else even comes close. Ive used the Royal Purple and K & N filters, experimenting between the two. My...
  19. Jigstick

    Hood Visor

    Can somebody recommend a hood shield for a 2018? I can't seem to find some that uses factory holes for installation. And I don't want a skin sticking to the paint.
  20. Jigstick

    Undercoating for rust prevention?

    Is it safe for the factory frame coating? FF, Krown, etc all can have a detrimental impact on certain factory frame coatings. Essentially dissolving it. I know this pertains to GM frame coatings, but im unsure about Fords. Does anybody know if its safe to spray either FF or Krown onto the...
  21. Jigstick

    Undercoating for rust prevention?

    Is Fluid Film safe for the factory coating on the 2018 Expy frames? My 2018 has 1500miles on it, and Im wanting to get Krown or FF on it. But I don't want either to eat off the factory frame coating.

Latest posts

Members online

Total: 4,453 (members: 9, guests: 4,444)

Forum statistics

Threads
57,153
Posts
536,980
Members
54,953
Latest member
rockinghranch

Share this page

Top