Just picked up a 1 owner 01 Eddie Bauer 5.4

[Walsh82]

Hello everyone. My name is Shaun from Lake In The Hills,IL. As the title states I just purchased a 01 Expedition with 188k. I'm currently in the middle of a few modifications. Cold air intake, Flowmaster cat-back, SCT tuner, and a mechanical trans temp gauge to monitor the 4R100. Looking forward to sharing intrest and advice with fellow Expedition owners.

 

[Walsh82]

Here it is

 

[GAINMOB]

welcome to the site

 

[Canadian Expy]

Welcome

 

[Mediamonkey11]

Welcome! Props on the mechanical temp gage, I love mine!

 

[BIG GREEN FORD]

Hello everyone. My name is Shaun from Lake In The Hills,IL. As the title states I just purchased a 01 Expedition with 188k. I'm currently in the middle of a few modifications. Cold air intake, Flowmaster cat-back, SCT tuner, and a mechanical trans temp gauge to monitor the 4R100. Looking forward to sharing intrest and advice with fellow Expedition owners.

Where did you hook up the mechanical trans temp too? Would be grate to know. Thanks

 

[Mikes05expy]

Welcome

 

[GAINMOB]

? is your trans stock? if so is there really a need to monitor it or do you have future plans for trans as well in the future

 

[BIG GREEN FORD]

? is your trans stock? if so is there really a need to monitor it or do you have future plans for trans as well in the future

If you talking to me. Its because I go 4wheeling alot and tow alot so it would be grate

 

[Walsh82]

I'm going to T into the cooler line leaving the transmission. Im in the process of removing the center console and drilling the hole to run the lead. Trans is stock and I dont have plans to tow but I'm driving to FL in a couple weeks and want to keep an eye on the temp since it will be hot out and Tenn has quite a bit of inclines.

 

[Mediamonkey11]

I did mine a little bit differently, and that I installed a remote transmission filter kit and tapped into the housing to install a transmission temperature probe that runs to a gauge installed in my dash.

 

[bedrck46]

you could also consider a blue tooth OBDII device, the torque pro app and a smart phone or tablet that way you could monitor both incoming and out going temps to see how well the trans cooler is working