What do I need to replace?

[mrasmussen]

My driver door power windows switch lights are out, actually, one of the switches are lit, the rest are out. Do I need to replace the entire unit or is there a bulb?

 

[mrasmussen]

this is the part that is partially lit

New Ford Expedition Power Window Master Control Switch 2003 2004 2005 2006 | eBay

 

[2004XLT]

I think the whole unit needs to be replaced, unless you could solder new leds in. Mine are the same way but I haven't looked into it much. I know the bulbs are not plug and play.

 

[GAINMOB]

there have been a couple of guys that have put in new LEDs in there switch...one changed the color to blue and the other red from what I remember...there should be a write-up on it but u'd have to search for it...this was years ago...so wiring new LEDs is an option...or buy a new switch those are ur options...I looked into p/n for the bulb and there isn't one so to answer...LEDs or new/used switch

 

[Skauber]

Yeah, those lights are internal LED, non serviceable. But it is possible to replace then if you take it apart and solder new LEDs in, if that is doable depends on your skill level.

 

[GAINMOB]

I want to do it but I'm going to buy or pull from junkyard and play around with doing it

 

[mrasmussen]

I'll probably leave them alone, I'm getting used to it, I guess it isn't that big of a deal. Thanks for the replies....

 

[Hamfisted]

It's only about $40 from Rock Auto. I replaced mine years ago with the Airtex brand and it's been good since. It's plug and play, just pop up the surrounding trim piece and plug it in.


-Mike


Expedition Window Switch from RockAuto.com

 

[46L281GT]

I bought his one a few months ago and no issues whatsoever.

http://www.switchdoctor.net/ford-ex...edition-master-power-window-switch-2003-2006/

 

[Skauber]

20 bucks, can't beat that!