tmbarnes77
Active Member
I just lifted my 05 Expy 3-1/2x2-1/2 but the 35" trail graps rub the struts. Any ideas to fix this problem? I thought about 1.5" wheel spacers.
Lifted Expeditions of EF.com (picture post)
- Thread starter SOLISIMO
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
13crushrubi
New Member
My 2010 Exped
Here is my girl !!!
Here is my girl !!!
OP
OP
Bro you need to start your own thread in the 3rd generation section. That thing is bad ass
Here is my girl !!!
Nice ride. Any rubbing anywhere? What are the specs for the wheels including offset and bs. Also go say hi in the new member section
Survival
Full Access Members
13crushrubi
New Member
It rubbed a little bit on the front tires on the running board when turning, I removed the end cap on the front of the running board and there was no more rubbing. We took it out to the mountains this weekend and we had no rubbing at all. On the wheels they are 20" x9" wheel with a +18 off set. I am very happy with the look and the performance. Next we are going to fab a full aluminum skid plate across the whole bottom.
samrider777
Full Access Members
That thing is beastly.
Sent from my SCH-I535 using Tapatalk 4
Sent from my SCH-I535 using Tapatalk 4
Skydoc
Member
3/2 lift with fuel 20" and 33" michelins
http://www.expeditionforum.com/atta...ment.php?attachmentid=7279&stc=1&d=1380770956
http://www.expeditionforum.com/atta...ment.php?attachmentid=7279&stc=1&d=1380770956
Similar threads
Latest posts
-
-
-
2006 EB Rear HVAC Inoperable / Fuse, Relay, Resistor Good- Latest: 2006Overlander
-