It feels/sounds like its coming from the transfer case or rear axel. The front shaft is removed because my transfercase motor stopped working at the end of winter. It got stuck in 4hi and was binding on turns after fooling with it for an hour i managed to get it to return auto 4 wheel (no 2 hi...
If i suddenly hit there is a pronounced clunk in my expedition. It only happens after coasting at highway. Speeds and i suddenly goose the throttle (only pushing the throttle 1/4 down but not easing into it at all) could this still be u joints even though it does not happen from reverse to drive...
I had this same issue felt like being in a paint shaker when it would happen. Finally fixed. Pitman arm and idler arm. The drag link could stwist back and forth rather than only moving horizontally. Seems like they should have used 2 idler arms like most vehicles instead of a pitman arm that...
99 Eddie Bauer 175k miles. 5.4 4x4 4r100. Bought it with 160k miles and a severly knocking engine because previous owner neglected to put oil in it. Got a used 5.4 pi from a 99 f150 that had been totaled with 89k miles. so far ive replaced the plugs, subwoofer, and starter. I thought my new...
I replaced my sub with a bazooka tube subwoofer and it sounds better than stock. The bazooka is 8ohm and 50 watts. I just took apart my old tube subwoofer and its a direct swap.
Great information! I'd love to upgrade my sub but I'm not will to sacrifice cargo space. 95% of the time I have my third row seat removed to haul tools for my job
So I did some research and from what I understand only the trucks that have 2hi option on the dash have the vacuum hubs. I think the trucks like mine that have auto4 4hi 4low have permanently connected hubs and no iwe solenoid. I also flushed the transfer case fluid last night and jacked up the...
Also im not sure what part you talking about? Sorry, what is IWE? Ive been looking at diagrams online of the transfer case and I see theres just the one motor, does that select range and contral engaging the cluctch for a4wd?
4 wheel low
This is just my experience when I tried out 4 low. It will go into 4 low at a stop but to disengage I needed to be rolling around 2mph with the transmission in neutral, then take it out of 4 low. otherwise it would just try and give up
Another 4x4 newb question.
I know I need to rotate my tires. they all 4 match. but the fronts have about 60% tread and the rears have like 90% tread. Would failing to rotate tires on time cause these symptoms?
I did a lot of driving in snow lately and the truck did amazing. Shifts from auto 4 wheel to 4 high and 4 low no problem. However It seems like the clutchpack for the auto 4 wheel is not disengaging 100% If i make a very slow turn with the wheels turned sharp im hearing a groaning noise, not...
mach sub
I have a 99 and the sub was blown. So I disassembled a bazooka el8a to use the 8 inch woofer. Same ohms fits OEM box pretty well. I used a new mounting gasket. But so far it works great and sounds great and I have been blasting it for months.... I'm sure anyone wanted to to this can...
good idea, i should have mentioned I already did that and every pump I find has the sensor in it and none of the parts stores ask with or with variable assist. they all show the pump with the sensor.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.