Recent content by Jay87LX
-
Adding Electric fans on 2nd gen
I am looking to add dual electric fans to my second gen. What would be the best way of doing this? Any links or write ups?? I have an '03 5.4 2v- Jay87LX
- Thread
- Replies: 4
- Forum: 2nd Gen - 2003 - 2006
-
What seats will interchange??
I have a 2003 XLT FX4. The seats are fairly basic, cloth, 2 tone. I would like to upgrade the front seats with something with more comfort, side bolster etc. I am even open to recovering the right seats with Katskinz leather. Are any of the F150 years/seats bolt in, especially the later years?? -
2003 XLT 4x4 high and 4x4 low light flashing
Being that is has been 5* here with no let up in sight I brought it to a trusted mechanic. It was a broken wire from the passengers side kick panel fuse box to the switch or relay (whatever) in the B pillar- Jay87LX
- Post #2
- Forum: Transmission & Drive train
-
2003 XLT 4x4 high and 4x4 low light flashing
hi. Driving down the road and my 4x4 high and 4x4low light flash 3 times When I stopped I tried to engage A4wd 4H and 4L and none will engage No previous issues, just got very cold here in Cleveland Oh the past few days. Both front hubs replaced less than 10K ago and the 4x4 worked since. Does...- Jay87LX
- Thread
- Replies: 2
- Forum: Transmission & Drive train
-
-
rusted transmission cooling lines
keep both lines disconnected at the radiator and aim them into a bucket, start the truck for 1-2 seconds, you will be able to see which line is pumping fluid, keep that line feeding into the empty bucket, put the other one into a container of all your new fluid to suck up as it pumps out the old- Jay87LX
- Post #5
- Forum: 2nd Gen - 2003 - 2006
-
2nd Gen rear lower control arm bushings
I started hearing knocking in the back. Jacked it up, pry bar under the wheel and sure enough the rear lower busing is worn. Has anyone replaced just the bushing? Did you use a ball joint type c clamp press to press it in there?- Jay87LX
- Thread
- Replies: 1
- Forum: Suspension
-
rusted transmission cooling lines
if you are replacing the lines from trans to cooler and back and doing a service at the same time you will probably need more than 12-13 qts as I would drain the TC as well, if you plan on doing any towing a larger cooler wouldn't hurt. This whole upgrade is soon on my list as well as Jmod- Jay87LX
- Post #2
- Forum: 2nd Gen - 2003 - 2006
-
Rancho Quicklift
I emailed rancho as I am interested in how much lift they provided and was surprised at 1'frt and 3/4 rear only- Jay87LX
- Post #18
- Forum: 2nd Gen - 2003 - 2006
-
So... 2008 rocker panel repairs. Weld or glue?
I had did a full write up with pics on the replacement on my first gen, Unfortunately Photobucket pics aren't being hosted any longer. Here is the link and if you want the associating pics shoot me ur email or number and I will send them... -
Anyone have the GoRhino grill guard on their 2nd gen?
I am thinking of adding the GoRhino 3000 to my '03 FX4, I am wondering if you are able to retain the front tow hooks as it seems to mount to the frame using those holes although I did see one pic where they retained the tow hooks but was unsure if it was a goRhino or if they were fabbed on...- Jay87LX
- Thread
- Replies: 0
- Forum: 2nd Gen - 2003 - 2006
-
99 Ford Expedition Rear Drum to Disc Conversion?
^^^ This,- Jay87LX
- Post #3
- Forum: Transmission & Drive train
-
-
Latest posts
-
-
-
-
2006 EB Rear HVAC Inoperable / Fuse, Relay, Resistor Good- Latest: 2006Overlander
-