Recent content by riccoh

  1. R

    EGR Flow Insufficient

    don't waste your money on a shop if you are a bit mechanically inclined, here is the fix, all you will need is to removed the TB and get the botom ports cleaned, trusme a few gaskets and some TB cleaner did the trick for me when I followed this tutorial.. just a bit time consuming, takes about 1...
  2. R

    Dash Board/Instrument Panel lights

    you need to find the tutorial I know is aroung here somewhere, the first thing is the pesky headlight switch, then a few screws and pop out the radio bezel and you willbe able to get to the remainding screws, just remember that if the PATS system is operational (acording to the manual) do not...
  3. R

    Dash Board/Instrument Panel lights

    most likely the CEL bulb has been removed from the panel and/or is burnt out, if I remember correctly this are the #71 penut bulbs, you will have to remove the dash panels, and change that little bulb, i will sugest that once the panel is off alse replace all 5 194's bulbs that are there for the...
  4. R

    Post pics of your toys past and present.....

    i new I recognized your bike.. I'm there as well as in the Denali, busanation, mustangworld and a few 7's forums.. but with limited down time I do spend most of my surfing on busaorg.. great group of folks there.
  5. R

    Post pics of your toys past and present.....

    TB3 are you in the busa.org? that bike looks familiar..http://expeditionforum.com/showthread.php?t=7111
  6. R

    Light bulb size interior and exterior

    i can take some pics tomorrow night and I did also replaced the running board lights with the same 194 white bulb and gives that hint of blue when the doors are open.. I'll post some pics soon
  7. R

    honest opinions please

    like other have said, get the little bugs taken care and it will last you a long time. I have own a 98 for only 4-5 months with 140k on the clock, and trust me when I say my wife don't even want to drive her 08 gmc denali with all the bells and whistle. this EXPI's are amasing once you take care...
  8. R

    Light bulb size interior and exterior

    from autolumination, I used their #192 and #74, not 78 because I couldn't find the 78's but they fit just fine.. 1. the issue with that dash is the film they use on the back of the face of the gauges, that is the limiting factor.. A. since it's blue I went with a white bulb and will still...
  9. R

    Light bulb size interior and exterior

    here is what I found: Be aware that some of those are wrong, I just switch my instrument cluster with the 194(5 needed)/78(4 needed) bulbs from autolumination.com because I prefer the blue insted of the green lights on the dash, also the 194's fid the steps (4)and the ac panel (2)as well. as...
  10. R

    updates on my fiberglass box

    saund waves tend to cancel each other out in close proximity, so it wont hit as hard as it should, like when there are separate chambers, specially if you are running out of the mill subs, that are average at best. not to mention distorsion ar higher volume. just my 2ct,
  11. R

    how I met my 98 ExPI

    yup, 13.5 for the white busa, 4k for the expi and 8k for the red busa (which was mine, sold it and bought it back.. a year later.. the red busa was what i used to hook the ram up...and still had 3 k left for a rainy day..lol
  12. R

    how I met my 98 ExPI

    So since I really hated not being able to fit my 07 RAM in the garage, sold it and made enough for a few toys to include the Expi. not a bad deal.. now the expi sits in the drive way: The Polar Bear (sold): 44748[/ATTACH]"] The Polar Bear II (bought): 44750[/ATTACH]"] MIKA (2010...
  13. R

    updates on my fiberglass box

    you might want to have separate chambers for each sub, also if you are going to use those kenwoods, remove the plastic cover fo rthe magnets, they will come off in the box and vibrate like crazy..
  14. R

    CD Changer "No Mag" Issue

    mc i have a complete cd changer I pulled out of a 97, sitll working and has the cd mag. 50 shipping and is yours
  15. R

    Battery Light came on?

    I had the same problem, looked at it on the chiltons manual and the recomended solution was to replace the brushes on the alternator, i rather pay 5 dollars for the brushes than 300+ for a complete alternator, just make sure not to loose the spring holding them to the alt.
See more

Latest posts

Members online

Total: 1,231 (members: 6, guests: 1,225)

Forum statistics

Threads
53,584
Posts
502,192
Members
47,159
Latest member
tifanydire

Share this page

Top