Just wondering if anyone knows if there is a difference between the front bearing hub assemblies from a f150 vs one for an expedition?
I know the part numbers are different but sitting on the bench side by side they look identical. they are both from a 1999.
Thanks
just wondering if anyone has ever replaced the steel power steering coming from the steering box? and does anyone know if I can just replace the metal lines?
thanks
I got a 99 expedition with the 5.4, My problem is when I start the truck when it's cold I have a misfire until the engine is at normal operating temp.
I changed the plugs ( motorcraft sp-479) and coils ( ebay from uneek) last month. it ran fine till last week.
the check engine light...
was planning on changing the coolant in the expy and was what is the best way to drain the colant? and do I need to remove the block drain plug too?
Thanks
Just wondering if anyone knows how to check if the transfer case is locked in 4wd?
with the front wheels off the ground in awd, if i grab the front drive shaft i can't turn it, but if I spin the wheels by hand they go in opposite directions
I got a 99 E.B. with the awd, 4hi and 4lo.
any...
I got a 99 ford expedition with awd,4hi,4lo.
My question is does anyone know how to check if the 4wd is disengaging?
When I jack up the front and try to turn the drive shaft ( switch is in the AWD) i can't turn it. if I turn one wheel the other goes int he opposite direction. Is this...
Just wondering if anyone ever used the Accel C.O.P. from summit?
or any experience with any other brands, I got a 99 exp. with the 5.4. I had to replace one so far and I think another one is starting ( the plastic is starting to crack)
Thanks
Just wondering if anyone ever had to change the 2 brake lines that go between the maste cylinder and abs module and is there any special procedure for bleeding the abs?
Also does anyone know if I can get these lines aftermarket? ( they have the braided flex line in the middle)
Thanks
I got a 99 E.B. and will need to replace the brake lines. does anyone know if I can replace the line that goes between the master cylinder and ABS module ( looks like it has a stainless flex line) with a steel line instead? I was also told I have to take it to Ford to properly bleed the brakes...
Has anyone use monroe sensa trac shocks on their expy? or should i just get the gas matics? they're going on a 99 expediton E.B. mainly driven on the highway.
Any other suggestions?
got a 99 expedition EB with a 5.4,
the service engine soon light came on and I got a P0171 code (#1 bank lean) would this be caused by a bad o2 sensor? I've never changd them and i think they are still the originals. if the left side are bad how can I check them? I think I got 4 sensors...
I've got a 99 expedition, When i turn the steering wheel or go over bumps it makes a creaking noise and u can feel it in the steering wheel.
I've changed all ball joints and tie rod ends. I was told it could be the itermediate shaft ( does anyone know if it's suppose to have a little play...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.