studabaker
Full Access Members
I have an elmscan 5 to connect to the obd port however I am not sure what software will improve on the elm327 bluetooth i have on my phone. I am having low voltage on both banks and I have been replacing coil packs and improving the ride in many ways. the moog sway bar linkages have made an incredible difference. I also tightened down the frame bushings which was free and made a significant difference. I finally repaired my airlift bags inside the springs which has helped. I did the head gaskets which has made a significant difference and now I am able to notice some other issues now that I have eliminated most of the other vibrations. The engine has a murmur kind of issue and I have the obd thing for my ohone and it shows low voltage intermitently but I dont know how to identify which coils are the issue and when I replace one it helps but bank 2 are all new and I am still getting a low voltage reading on that bank?
What program should I get that can do more advanced stuff?
How could I identify a short, could there be a intermitent short somewhere and how could if find that?
How can I get the engine to run smooth?
I am pretty happy to be where Im at with it running and everything being resolved in my suspension. Now I notice the engine clearly vibrating through the whole vehicle when there is low voltage. At least I can tell that I have low voltage once on each side. Just keep at the coil packs. They short to the block I guess...
Thanks
What program should I get that can do more advanced stuff?
How could I identify a short, could there be a intermitent short somewhere and how could if find that?
How can I get the engine to run smooth?
I am pretty happy to be where Im at with it running and everything being resolved in my suspension. Now I notice the engine clearly vibrating through the whole vehicle when there is low voltage. At least I can tell that I have low voltage once on each side. Just keep at the coil packs. They short to the block I guess...
Thanks