OP
OP
janrivera17
Active Member
I love your truck's look, looks almost like an excursion !
Fender Flare Upgrade?
- Thread starter janrivera17
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
TactialMonkey
Full Access Members
Bushwacker - Fender Results
I figure that that the front fit but the back may just barley fit on my expy i would like to know if any one has done so?
For the cut out style
I figure that that the front fit but the back may just barley fit on my expy i would like to know if any one has done so?
For the cut out style
tonydiv
technical advisor
You absolutely cannot use the rear F150 flares on an expedition. They will overlap the rear doors by about 3 or 4 inches. You can't just cut them, because they are 'hollow'.
Captain Morgan
Full Access Members
I bought my XENONs from Desert Ratt for $200, but when I opened the box I discovered it had been pilfered through. There was an old pair of gloved in the box, the screws were all strewn out but accounted for.
The 6 pcs are still in my garage and I have aspirations of one day sanding\priming\painting them. Then I have to remove each tire to mount them with screws and tape. Fully 40hrs work.
.
The 6 pcs are still in my garage and I have aspirations of one day sanding\priming\painting them. Then I have to remove each tire to mount them with screws and tape. Fully 40hrs work.
.
tonydiv
technical advisor
I painted mine with bedliner paint. The total installation time took maybe 4 hours. I didn't have to take the wheels off in order to put the screws in (there are only a couple screws in each flare, the tape is what really holds them on.)
Similar threads
