Simon Clowes
Member
1999 Gen 1 Expy
I recently installed LED brake/indicator lights. I fitted 6 ohm resistors across them, as recommended, and replaced the indicator relay with an EP-27 as recommended on posts here and by a Ford mechanic. My issue is despite that I still have hyper-flashing at the rear, while the normal bulbs at the front flash normal.
My thoughts run along the lines of 1) resistors not making good connection; 2) resistors on wrong wires (on black light green/red for left rear light, cannot recall colour for right side); 3) resistors are not the marked value or just plain faulty.
What am I missing here??
I recently installed LED brake/indicator lights. I fitted 6 ohm resistors across them, as recommended, and replaced the indicator relay with an EP-27 as recommended on posts here and by a Ford mechanic. My issue is despite that I still have hyper-flashing at the rear, while the normal bulbs at the front flash normal.
My thoughts run along the lines of 1) resistors not making good connection; 2) resistors on wrong wires (on black light green/red for left rear light, cannot recall colour for right side); 3) resistors are not the marked value or just plain faulty.
What am I missing here??
Last edited:
