I'm looking at a bigger wheel and tire combo like 24inches and wanted to eliminate the gap on the fenders. Someone from this forum directed me to Eco power parts where they can manufacture the springs that lower the truck 2" and 2.5" however I saw the description of the product quoted below that it does bottom out over speed bumps.
Questions:
1. What worse cases I will encounter with the truck bottoming out on the bump stops?
2. Is there something I can do to resolve this? Replace shocks? Bump stops?
3. In the long run, will it damage any other components on my truck?
https://www.ecopowerparts.com/shop/...&products_id=163&zenid=wPrzTMIQ67SbWOE9y63Zw0
"They ride well, 15% stiffer than stock but do bottom on the bump stops over speed bumps but cornering is much better than the super loose ride from stock."
Questions:
1. What worse cases I will encounter with the truck bottoming out on the bump stops?
2. Is there something I can do to resolve this? Replace shocks? Bump stops?
3. In the long run, will it damage any other components on my truck?
https://www.ecopowerparts.com/shop/...&products_id=163&zenid=wPrzTMIQ67SbWOE9y63Zw0
"They ride well, 15% stiffer than stock but do bottom on the bump stops over speed bumps but cornering is much better than the super loose ride from stock."
