BigRed2004
Latest activity Postings About
-
-
BigRed2004 replied to the thread 2006 expedition King ranch how to put the vacuum lines back together.Can you post a photo? -
BigRed2004 replied to the thread CYLINDER 1 MISFIRE ON COLD START.Strange indeed. Well at least it hasn’t returned. But if it does, do your best to look all over for fresh trails of liquid. Maybe even...
-
BigRed2004 replied to the thread CYLINDER 1 MISFIRE ON COLD START.@PNWEddieBauer, I would consider getting some Sea Foam Spray and trying that out to help remove carbon build up. That could be a problem...
-
BigRed2004 replied to the thread Cold snap, then fluid on the ground.Did the weather seem to have an impact this time?
-
BigRed2004 replied to the thread Looking for more power/speed.Add a centrifugal supercharger. Expeditions share a similar enough engine bay layout to a F-150. ‘Possibly’ best bang for the buck.
-
BigRed2004 replied to the thread Cold snap, then fluid on the ground.Sounds like you may of had some contraction from the weather that may have caused some slight gapping in one of the seals. But this is...
-
BigRed2004 replied to the thread Looking for more power/speed.Not sure if going faster than 105 is a joke or serious. But making a brick move faster would require a loss of some weight. If you don’t...
-
BigRed2004 replied to the thread Timing set and a startup anomaly question.You definitely have a busy schedule ahead of you. Best of luck to you with all of that, hopefully repairs go smooth. Hope the health...
-
BigRed2004 replied to the thread Cold snap, then fluid on the ground.I agree with @whtbronco of using a white paper towel to 1st determine what fluid it is. My first thought was a rear main seal on the...
-
BigRed2004 replied to the thread Timing set and a startup anomaly question.Have you had a chance to perform the job? Curious to know your experience with either tool.
-
BigRed2004 replied to the thread Oil filter wrench.I also use a steel band wrench style similar to this one. It fits just well enough between the fan shroud and frame that I can get the...
-
-
BigRed2004 replied to the thread Timing set and a startup anomaly question.That method could work, because you should see the valve and keeper sticking up as the spring continues to compress. So it is a safe way...
-
BigRed2004 replied to the thread 04 Expedition with some mods.Nice and clean @svt_amg.
-
BigRed2004 replied to the thread Timing set and a startup anomaly question.Your average valve length is 4.6” so you would be fine based on the math. But I can understand if you are concerned and want to find a...
-
BigRed2004 reacted to whtbronco's post in the thread Timing set and a startup anomaly question with
Like.
@BigRed2004, well the idea of getting the piston to TDC to hold the valves closed or nearly closed is interesting. Since these are...
-
-
Loading…
-
Loading…
