B
Reaction score
305

Latest activity Postings About

    • B
      *UPDATE* second shop positively identified that the oil cooler was bad. tech actually sent me a short video under vehicle with oil...
    • B
      If you’ve done serpentine belts before, it’s not bad. The AC stretch belt is a little different. On the main belt which is the firsts...
    • B
      I’d second to have the next shop closely check the oil cooler and if they cant, replace it and get the updated thermostat. That’s the...
    • B
      BMW2FORD replied to the thread CDF around 3.
      There’s a thread here called adding skid plates to a 2018 limited that has a lot of good info. I added the 2018 Raptor Trans skid plate...
      • 1770397023092.jpeg
    • B
      BMW2FORD replied to the thread CDF around 3.
      I have a 2018 and the CDF drum failed at 70k. They replaced it with the un updated drum since at that time it wasn’t available. Torque...
    • B
      BMW2FORD replied to the thread CDF around 3.
      I had no success. Broke down 1250 miles from home and the local dealer there had no one 10 speed certified so all they could do was...
    • B
      BMW2FORD replied to the thread Left Front "Whirring" noise.
      Best way to check a wheel bearing is to have the truck off the ground, shut the traction, put it in 4h and have someone drive it at the...
    • B
      No codes at all which I thought was strange. Try placing a long screwdriver or mechanics stethoscope on the VCT solenoids while it does...
    • B
      I had this same problem. It was a distinct metallic tap from the top front of the engine on bank 1 pass side only on a hot restart just...
    • B
      BMW2FORD replied to the thread Dirty Air Filter.
      I have a 2018 and at about 15k it looks pretty dirty. Somewhere between 15-20k I’ve been changing it with a genuine Motorcraft...
    • B
      Check out this video. I couldn’t get the MOPAR rust penetrant and used PB blaster from Home Depot. Trick is to really spray them, use a...
    • B
      Hey all, one of the things Ford does is change how hollow the bars are but the OD thickness is in many cases stays the same. See below...
      • 1766159636364.jpeg
  • Loading…
  • Loading…
Top