Broncoholic
Latest activity Postings About
-
-
Broncoholic replied to the thread Can I fit 285/75/17 on Second Gen with a 2.5 level and 0 offset wheels.They'll fit. 0 is an aggressive offset compared to the factory 44mm offset. I had 20x10 with 0 offset for a few years. The tires would... -
Broncoholic replied to the thread CODE P0452 READS IN MY SCANNER.Yes, R303 is the relay that burns out or melts the solder on the board. That is the problem I was talking about. I had to replace my...
-
Broncoholic replied to the thread CODE P0452 READS IN MY SCANNER.The fuel pump runs and pumps - the probability that it's good is much higher than it's bad. Find a way to test the pressure. If you're...
-
Test for fuel pressure at the fuel rail schrader valve with the key ON. If you don't have a fuel pressure test gauge, even a tire gauge...
-
Broncoholic replied to the thread CODE P0452 READS IN MY SCANNER.Don't jump to replacing a fuel pump without diagnostics. It's a waste of time and money. Turn the key to On and listen for the pump to...
-
Broncoholic replied to the thread Ford Expedition 2003 from France.My auto headlights quit working a few years ago. They stay on at all times. I assume it's the sensor, but I've never tried fixing it.
-
Broncoholic replied to the thread Catch can collection.The milky collections seem to be more common in cold weather / cold climates. I've had a catch can on our 2016 for 6 or 7 years (about...
-
Broncoholic replied to the thread CODE P0452 READS IN MY SCANNER.2003 Expedition gas tank is notorious for small cracks at the vent fittings. That is likely causing your low pressure/vacuum leak. Do...
-
I don't have a good option and certainly nothing just bolt on. However, I believe anything that can support the trailer tongue weight...
-
Broncoholic replied to the thread Suspension solution to 04 expi 5.4.That's sounds heavy. Are you exceeding the towing capacity or GAWR? Have you tried a weight distribution hitch?
-
Broncoholic replied to the thread Adding some stuff, just questions for now.I'm adding a different perspective shot to show the fit. Sorry, I don't have a before (OEM rims) but OEM definitely tucked under more...
-
-
-
Loading…
-
Loading…
