Recent content by fuzzmanmatt

  1. fuzzmanmatt

    GD part number tail light pigtail

    It looks an awful lot like a WPT-1025. Picture is from the Motorcraft Connector Catalog. WPT1025 https://www.amazon.com/Motorcraft-Wire-Asy-P-WPT1025/dp/B004A2B9V8
  2. fuzzmanmatt

    2008 Ford Expedition stuttering while driving at 40-50 mph

    Ha! I actually am having this exact issue, decided to see what info I could find. It's like a surging, most noticable around 1700 rpm, it dips and then catches up. My first thought was TCC solenoid, since the issue goes away when overdrive is turned off. It COULD be an ignition issue, but...
  3. fuzzmanmatt

    Who else runs F150 wheels on their 3rd Gen?

    Yup, took a grinder and whacked about 1/4" off the axle, not even down to the threads. Just enough to get the center cap on.
  4. fuzzmanmatt

    3rd row seat install

    Darn, I see you're in California. I've got a set sitting in my basement I'd love to get rid of, but yeah, you're going to need wiring to get them hooked up, I don't think the SSV came with it. Unless you want to build your own harness. The switches are just polarity changing switches going to...
  5. fuzzmanmatt

    3rd Gen Ditch Light Mounts

    I've got pictures of mine here. https://www.expeditionforum.com/threads/ditch-light-mounting-brackets.46298/#post-479066
  6. fuzzmanmatt

    2022-2023 Foglight Trim/Bezel Swap

    Honestly, you're going to get just as durable a finish with a vinyl wrap as the stupid plastichrome, if not better. And you could do any color of chrome you wanted.
  7. fuzzmanmatt

    Who else runs F150 wheels on their 3rd Gen?

    Got some takeoffs on mine! I think it looks pretty good compared to the old stock ones, and they actually hold air!
  8. fuzzmanmatt

    Would like to see Ham, GMRS, CB radio installs on Gen 3 Expedition

    There is SO MUCH ROOM under the dashboard, you can easily mount that SVR200 under there, but that old Syntor might take some work. Do you have a subwoofer? If not, there's plenty of space behind the covers on that side. I've got my TYT base mounted beside the tunnel on the passenger side, the...
  9. fuzzmanmatt

    Sleeping/storage platform for 3rd Gen Expedition

    Not exactly a sleeping platform, but it folds pretty close to the same height as the second row, so I can lay down and nap if I stick my feet through the middle seat, and I don't even have to take out the kids car seats. It would be super easy to add a battery box underneath where the third row...
  10. fuzzmanmatt

    Looking for a phone mount that fits into the vent

    I would buy the Pro Clip mount myself, just bite the bullet and actually be happy with the results.
  11. fuzzmanmatt

    Drastic drops/returns of oil pressure (5.4L 3v 2009)

    Mine did that exact thing for a while, then it spun a bearing. You might get lucky and be able to rebuild it, but if you're not going to do it and have a shop do it, you may as well spend the extra for a reman motor to get installed. Then you know it's going to work, you'll probably get another...
  12. fuzzmanmatt

    Oil Filter: Is there a larger one that fits?

    The WIX 51087 is about 1.5" taller, same thread and gasket size, but you're going to run into clearance issues since it's so much bigger. And I don't see in my catalogs anything that's a whole lot wider, since the FL820S is already a pretty big around filter. You could probably get somebody to...
  13. fuzzmanmatt

    Running Boards

    I've got the ones that rusted off my 2007 just collecting rainwater in the back yard right now. If you were closer I'd say come get 'em!
  14. fuzzmanmatt

    Putting 2007 bumper end back in place?

    There's little clips molded into the bumper cover that need to snap into the quarter panel. If they're damaged or bent it's not going to lock into place. You may have to actually remove the fasteners in the wheel well and pull the whole side out to see if they line up, and then slowly align...
  15. fuzzmanmatt

    Putting 2007 bumper end back in place?

    SUPER simple! Assuming you don't bend anything while pressing it back in place, it just snaps back in. I got a backup camera so I didn't have to do it again after the first two times.
See more

Latest posts

Members online

Total: 1,562 (members: 22, guests: 1,540)

Forum statistics

Threads
53,533
Posts
501,775
Members
47,056
Latest member
jpwiseman

Share this page

Top