Recent content by IrnBru

  1. IrnBru

    Blend door or heater core???

    Went camping over the weekend and haven't had a chance to flush it yet. I suspect mine will look like that too.
  2. IrnBru

    Blend door or heater core???

    Okay, thanks for the help.
  3. IrnBru

    Blend door or heater core???

    That did the trick. Flow of air definitely decreases when switched to hot. Guess my heater core is plugged. Any tips on clearing the clog?
  4. IrnBru

    Blend door or heater core???

    OK, I'll check the hoses at lunch. Whats the best way to check the blend door without cutting holes?
  5. IrnBru

    Blend door or heater core???

    Is there a good way to tell which one is causing the lack of heat? I have an xlt with regular controls so things look mighty simple. I've watched the dash removal and glove box access videos on you tube but can't figure out which one is causing the issue. On 70* days I can switch to hot and get...
  6. IrnBru

    Photos of Trailer(s) that you tow with your Expedition

    Backing the Cruise Lite in for a wash.
  7. IrnBru

    Crazy starting isuues

    Kind of weird, mine started doing something similar today. Ran fine 15 minutes before it happened. Try to start and no fire. Cranks just fine, it did start one time and idled fine until I gave it some throttle then it start missing and died. Then it wouldn't restart. I'm thinking fuel pump but...
  8. IrnBru

    Need brake controller wiring help

    Looks like light green coming out of the connector for the brake switch if I'm reading this right. Someone feel free to correct me on this if I'm wrong. Could confirm by back probing the plug I guess. Autozone Wiring Diagram
  9. IrnBru

    Need brake controller wiring help

    Thanks so much for the info. I was beginning to believe I was losing my eyesight cause I couldn't find that darn connector anywhere. Guess I need to find out which color wire feeds the brake lights now.
  10. IrnBru

    Need brake controller wiring help

    Here's a pic of the OBDII Port, can someone point me in the right direction? I must be blind cause I don't see it.
  11. IrnBru

    Need brake controller wiring help

    Installing controller on '02 2WD without HD Towing. From what I understand all Expys have the factory installed wiring for the controller and this would simplify the job a lot if someone could help me locate them. I found a large loom near the OBDII Port that has red, black, white, blue and...
  12. IrnBru

    Aftermarket Trans Cooler Question

    Yes, still going through the rad since it gets fairly cold here during the Winter. Had some confusion at two parts stores after work. Tried to buy some more hose since my cooler only came with 3' of 3/8". Both stores stated they only had 5/16" hose and 3/8" trans fluid compatible doesn't exist...
  13. IrnBru

    Aftermarket Trans Cooler Question

    Did a search but couldn't find the results I needed. When installing an aftermarket transmission cooler which line should I tap into for the connection? I have a 4R100 if that makes a difference. I just bought a new travel trailer and don't want to overheat my trans.
  14. IrnBru

    paint picture updates

    Very nice, do you mind sharing the details about your lighting and mirrors?
  15. IrnBru

    How much gas your Expedition use?

    5.4 2wd with Gotts Mod, Mobil 1, K&N and Ultragauge with Hypertech Max Energy regular fuel tune. Mileage for my commute, which is about a mile, is terrible but I averaged 20.1 today on a 2-lane highway trip in the North Carolina mountains. :gr_grin:
Top