Laporterican
Member 38 From Colorado
- Joined
- Last seen
- Viewing thread Install F150 Bilstein 5100 or 6112 products on my 2004 Expedition?
Latest activity Postings About
-
-
Laporterican replied to the thread Smaller Wheels for Softer Ride.More sidewall makes a huge difference. My wife had a 2018 Grand Cherokee with 20s rode like crap, I put on the biggest Wildpeaks I could... -
Laporterican replied to the thread Navigator ZF5 Manual Swap.Before I pulled the Navi off the lift and started on the pedals and shifter hole, I thought it was a good time to take off the fancy...
-
-
Laporterican replied to the thread Navigator ZF5 Manual Swap.Hole is cut, clutch and brake pedal assembly is in, driveshafts are done, and most of the parts are on the bench waiting to get...
-
-
Laporterican replied to the thread Install F150 Bilstein 5100 or 6112 products on my 2004 Expedition?.Have you measured or compared 2018 Expedition rear shocks? My wife has a 2022 Timberline, I could easily measure and compare. I have a...
-
Laporterican replied to the thread Install F150 Bilstein 5100 or 6112 products on my 2004 Expedition?.@Vincent Vega What are the part numbers for the Bilstein 5100s you used? When I'm done with my manual swap on my Navigator I plan on...
-
That will be a nice setup when you are finished!! Are you lifting the body & what clearance are you looking at?? To bad that bigger...
-
Laporterican replied to the thread Navigator ZF5 Manual Swap.It was pretty straightforward. Lots of overlapping plastic panels, it was a bit difficult to determine which panel was attached to what...
-
Should not take long to remove seats, console & carpet. So much just pops loose. Not as many screws as you may think. Took me longer...
-
Laporterican replied to the thread Navigator ZF5 Manual Swap.Gutted the interior in the front, both seats, console, and the autoscum shifter. It's going to be TIGHT getting the shifter exactly...
-
-
Laporterican replied to the thread Navigator ZF5 Manual Swap.All the parts are on the bench, pretty sure I have everything I need to get this project on to the next phase. I’m heading out to the...
-
Laporterican replied to the thread Navigator ZF5 Manual Swap.I really don't think there will be any clearance issues, the ZF5 is taller where the shift tower is, which will need to get cut out, but...
-
Laporterican replied to the thread Navigator ZF5 Manual Swap.Finished pulling everything apart on parts truck, rounded up parts from local junkyards, measured, made many phone calls, powerwashed...
-
-
Laporterican replied to the thread Navigator ZF5 Manual Swap.I got the 4R100 and transfer case out last week, tomorrow I'll work on unloading all the scrap metal and car parts out of the parts...
-
-
I'm about to embark on swapping a ZF5 into my 2003 Navigator. Bought it for cheap with a bad tranny, happen to have a donor 2001 F250 w/...
-
-
-
Loading…
-
Loading…
Members online
- jnbhobe
- Chromo
- gtoaddict
- arock
- wpatters1229
- Southpawhd
- cosshog
- tspangle
- uweg
- bman440440
- WhooptyWagon
- ROBERT BONNER
- sweatman
- conradgagner
- DFendersExpy
- fordfam2022
- ColoradoJason
- Golface
- Marc Palmer
- Shovelhead Pete
- chuck571
- King Rancher
- johnesocko
- akacolonel
- solas19
- SyndicateZ
- Rob6805
- Expy_Max
- mr_dave
- brewer20
- ryanlhart
- pawj112
- Jon2099
- Tyra
- fothco
- Wangle
- Squark
- BlackCoffee
- Expoxone
- David Schaefer
- Laporterican
- bighayden
- bazookaphil
- rmillis
- Polo08816
- FridgeRover
- Meeker
- Nav_Feste
- greenhp
- TheAngryOgre