Recent content by one badexpedish
-
touchy steering
I have a 99 expy that has really touchy steering I mean if you were to take your eyes off the road for a second and then just move the sterring wheel a very little amount you would almost be in the ditch or the other lane of traffic. I have checked the sway bar and the links front and rear they...- one badexpedish
- Thread
- Replies: 5
- Forum: 1st Gen - 1997 - 2002
-
5.4l Head gaskets?
I have only replaced one head on a 5.4 when i worked at a ford dealer if its not the valve cover and you still want to take on replacing the head or both heads there is a cam holding tool and a cam follower remover/installer tool to remove the cam followers. A service manual should tell you the...- one badexpedish
- Post #8
- Forum: How To Section
-
97 EB Exhaust Manifold Removal
After you get the nuts ground off and the manifold removed you might be able to get another nut and mig weld it on the stud and sometimes the heat will penetrate enough to get the rest of the stud out.- one badexpedish
- Post #3
- Forum: How To Section
-
Stalls When Shifting Into Reverse - Transmission Going?
When you change the fluid and filter if you see a bunch of black friction material in the botom of the pan its possible that you could have some sticky valves in the valve body creating a cross leak in the valve body aplying forward clutches and planetaries at the same time. if you can put the...- one badexpedish
- Post #7
- Forum: Transmission & Drive train
-
power sterring pressure switch.
Wel I got the engine runing last night tok it for a long test drive and plenty of koeo to koer cycles and no check engine light from the power stering presure switch not being hoked up. When I bought the engine from the salvage yard they told me that i would have to swap intake manifolds because...- one badexpedish
- Post #2
- Forum: Electrical
-
power sterring pressure switch.
I have a 99 expedition and am installing an 01 5.4 engine in it Ive compared all the wiring plugs on the engine between the two years and it seems that they are the same with the exception of the power steering pressure sensor plug the 01 engine does not have it . What im wondering is will it...- one badexpedish
- Thread
- Replies: 1
- Forum: Electrical
-
01 engine in a 99 need help with wiring
I have a 99 expedition that im replacing the engine with one out of a 01 expedition while hooking the engine up i noticed that there is not a wiring plug for the power steering pressure sensor do i need to swap the harnesses over or can i use the 01 harness and not plug the power steering pump in ?- one badexpedish
- Thread
- Replies: 0
- Forum: 1st Gen - 1997 - 2002
