-
-
RRoast4570 replied to the thread 2017 - Bilstein 5100 all 4 wheels - Lessons learned.Granted I used bilstein 4600’s on mine but once I did the first one I found swapping the shock absorber out and keeping the stock coil...
-
RRoast4570 replied to the thread Tow package question.If you look at the harness clipped into your four pin, you will find a blue brake line wire that is capped off. So I would assume that...
-
RPop the hood and look to see if you have one of these. Our 2016 XLT had the 4 pin and didn’t have the auxiliary transmission cooler. I...
-
RRoast4570 replied to the thread Tow package question.And honestly, if you really want to just err on the side of caution, upgrade everything you can to account for the differences between...
-
RRoast4570 replied to the thread Tow package question.Correct
-
RIt's as easy as walking all the way to the back of the truck and looking. Round 7-pin trailer connection to the right of the hitch...
-
RRoast4570 replied to the thread Tow package question.And if you have a pre existing trans cooler, installing the updated one would be way easier for you than it was for me. But either way...
-
RRoast4570 replied to the thread Tow package question.So my 2008 has a class 4 hitch, no 7 pin, no cooler. So I have standard tow. But I aftermarketed the pin and the trans cooler From all...
-
RBest way to increase gas mileage is to lie about it.
-
RRoast4570 replied to the thread Power Stop Z23 Brakes Opinions.I have the Z23 Powerstops and I love them. I have good strong braking power with no problems pulling a travel trailer and off roaring...
-
RRoast4570 replied to the thread 5.4 3V Engine Timing Chain Replacement walkthrough video.Your 2005 5.4 V8 is a 3v. I believe the 2v 5.4 was phased out around 2002 in favor of the 3v. So should be the same.
-
RRoast4570 replied to the thread What to look for when buying a gen3 expy.Bed line it. Best excuse to do it
-
RRoast4570 replied to the thread F150 power fold mirror on Expy.What are these lights too? F-150? And how do they mount? Look awesome
-
RRoast4570 replied to the thread UCA question.So I noticed at 2.5 inch spacers on the front, my aftermarket UCA’s would still rest on the coils when the front end was off the ground...
-
RRoast4570 replied to the thread UCA question.Not really. I just replaced the lower ball joints when I did everything else. Those were completely trashed. But I didn’t notice any...
-
-
Loading…
-
Loading…
Members online
- 2015owner2015
- keny01998
- The Glampour
- doubleeagle45
- JohnSC
- Black bus
- Chillfam68
- AJ82
- krifenbu
- Mike Wolfe
- apex96
- Kmart13
- matsuno shuhei
- steve3591
- ziggyzag420
- rjrodney
- rd618
- pickles1107
- LazSlate
- Mothnuts
- kgoff
- JasonH
- Aaron Buchanan
- lptexastornado
- bond9002
- bman440440
- vincentrose
- peoples1234
- BASell
- grwilson
- justinp16ex
- PensFan
- Khan1013
- USKflt
- dlcorbett