Recent content by stang99gtv8
-
S
Belt squeak when shifting at WOT
Do not have a programmer installed. So i assume it's just the serpentine belt slightly loose? i guess with it approaching 100k miles i should prob just change it anyways.- stang99gtv8
- Post #3
- Forum: Transmission & Drive train
-
S
Truxx 3/2 Kit questions
Thinking of putting the truxx lift/level 3/2 kit on my 03 expy 4x4. A few questions on this before I pull the trigger: Will this effect the steering angle substantially? For instance, am I going to start breaking or wearing out joints and bushings quicker? Will my turning sway angles be...- stang99gtv8
- Thread
- Replies: 0
- Forum: Suspension
-
S
Belt squeak when shifting at WOT
So in my 03 expy, the only time I ever hear what sound like a belt squeak is when I am at wide open throttle and it shifts to the next gear. Doesn't matter what gear it's going to, just as long as it's shifting while I floor it. Any idea why it would do this? Doesn't seem to effect anything in...- stang99gtv8
- Thread
- Replies: 3
- Forum: Transmission & Drive train
-
S
Door Speaker Suggestions
When I had my mustang with a mach 460 system in it, I switched the whole thing out to run a pioneer 6X8 setup. I was extremely disappointed in the high frequency sound coming from the center speaker tweeters. They weren't the top of the line pioneer door speakers, but they should have done...- stang99gtv8
- Post #16
- Forum: Audio & Electronics
-
S
03-4.6 exhaust and intake
So I have an 03 expy with 4.6 4x4. It's basically a dog in terms of performance, but works well for the towing I do of a 6x12 enclosed trailer for DJ gigs once or twice a month. What I wonder is if I would notice any real world difference in the mileage and/or performance of my truck by doing a...- stang99gtv8
- Thread
- Replies: 5
- Forum: Engine & Performance
-
S
Rough Idle
Had exact same problem with mine last winter. PCV valve and hose was replaced for like $50, good as new.- stang99gtv8
- Post #25
- Forum: Engine & Performance
-
S
How to install subs
My sub setup that is now running as the juice for my power inverter is running to my battery through the door wiring grommet and into the fender well. If you can't find a hole in the firewall or don't want to drill a hole and such, it's one way to avoid all that if you don't mind fishing a wire...- stang99gtv8
- Post #3
- Forum: Audio & Electronics
