is your truck 4X4? if it is then these wont work as they are 3.55 vs 3.73
Front and rear diff same gear ratio you would need a new axle with 3.73 gears.
its your sway bar end link. both mine went and i got moog replacements for like $12 bucks per side. you wont find ones that look like your current ones unless you order from ford...they are plastic and metal combined.
Blue goes to 7 pin for brakes
Black goes to batt 20-30A
Red goes to boo(brake on off switch)
White goes to ground
Fifth wire for running lights(not needed)
NEVER release fuel pressure that way you will get raw gas in your face. and yes talking from experience. the best way is to pull the fuel pump fuse and crank it over it might start but might not if it doesnt ur good to go!!
if it helps my 97 doesnt have the connector in question. all data has is as a air fill solenoid, gate solenoid...pic:
http://i260.photobucket.com/albums/ii34/trdragons44/Untitled-1.png
the oil pump is on the crank behind the balancer and timing chain cover:
REMOVAL
1. Remove the timing chain.
2. Remove the oil pan.
3. Remove the three (A) oil pump screen and cover bolts and the (B) oil pump screen and cover.
4. Remove the two oil pump bolts and the...
here is my install all i bought was this adapter and this vehicle specific harness for my truck..crutchfield helps alot when u select ur vehicle....
here are the pictures:
i ran it through my center column to come out where the flip cover is so i could hide it when at school
i put it below...
i would definately put a fuse in there you dont want that 0 to fray and ground out...your battery would explode casue it would be like directly crossing the battery terminals together and be a dead short. i would reccomend a 175 cause thats what the main fuses/fusible links are rated for
it all depends on what year truck you have...97-2003.5/4 has to do with how the seat is machined on the plug and age of the plugs currently in the head, they like to throw them cause most aftermarket plugs will not properly torque to the head....now if you have a 05+ with a 3valve motor they...
thanks elvato i knew it was somewhere just forgot to look. barra follow the this Link then just put in your trucks info and you can either download or print the manual for yourself.
its written in the manual how to reset it for the proper magnetic area your in. if u dont have your manual i have mine its for a 97 just let me know if you need the directions.
i use the regular 5-30 full syn from mobil1. i have noticed the oil stays cleaner longer after the first few oil changes.(after it gets all the junk out). i have 186,xxx, miles on her now
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.