Yeah instructions would be good on how to do it. Thanks Elevato. Im just sorting out my options before I take it to a dealership. I noticed that going uphill was causing it to hesitate and it was a pretty damn hot day. It hasn't been doing that until just yesterday when it threw the check...
The COP and the plug was changed and still tripping the 2 codes so Im thinking the evap purge solenoid is bad and fuel is not getting to that particular cylinder.
I can send you an extra driver side assembly with the motor, just need the wiring harness and the mirror switched over to the other one. Send me a message if you want it. :)
I got these 2 codes today cause my check engine light tripped yesterday. The P1451 code is the EVAP canister solenoid and the P0306 code is a misfire in #6 cyl. Now can this P1451 code cause the misfire in the #6 cyl? Cause both of them sound related.
ok well I took my car to get scanned today and pulled up a p0306 and p1451 code. I believe the that EVAP canister solenoid is bad and its contributing to the #6 cylinder misfiring.
I wonder if the clutch pack in the A/C compressor is working right, it would click on and blow cold but also can be dragging causing your truck to run rough. You might want to change it out and see if that cures your problems or spray a little WD-40 on the seam of the pulley (where the clutch...
Actually that happened to me when I was 40 miles outta town today. I noticed it was kind of hesitating around 45 mph when I go to WOT. I barely touch the throttle and it drives normally but when I go uphill it feels like that turbulence you described and I had to turn on the OD just to make it...
With the 97 expys on up you have that angled area which you would require you to take the dash apart and cut away at that angled area to make a double DIN work, that's why a single DIN unit is more favorable to installers and DIY guys because of the work involved. That is why when you pull out...
I step on my e-brake pedal and the e-brakes won't engage, there's no fluid coming out from the rear of the wheels but the cable still pulls to engage. I'm guessing that the brake lining on the e-brake shoes are gone. Any suggestions on how to check this?
I was wondering how you can take out the stock fog lights in a 97 Expy EB? There's some old mud in one of my fog lights and I need to take it apart and clean the inside of the lens. Is there any diagrams on how to remove them? Thanks!
You are going to need to get an RCA converter if you are going to hook up an amp with your stock stereo. If you have an EB then it will be twice as hard because of your factory amp working off the stock unit. I'd just change out to an aftermarket stereo and run your amp and subs off that.
I have a 97 Expy and I have utilized the spot where the original 8" mach sub went. I kept the enclosure in there and replaced the amp and also took out the harness to the factory amp. Im running a 300 watt amp with a 600 watt Lanzar 8" sub. It hits pretty good and with the factory speakers...
Are you just looking for the grey surrounding area? If so I found one on FordOEMParts.net, its called the door handle bezel (Illustration #5) will cost you $38.85. The black piece behind it is a cap (Illustration #7) and its $3.67.
This is the recall I was talking about:
Vehicle Make / Model: Model Year(s):
FORD / BRONCO 1994-1996
FORD / EXPEDITION 1997-2002
FORD / F150 1994-2002
FORD / F250 1994-1999
LINCOLN / BLACKWOOD 2002
LINCOLN...
I have 97 EB Expy, recently changed the brakes on it, new rear calipers and pads, front pads and re-lubed the whole thing. I didn't bleed the fronts but I bled the rears. While driving a couple miles the ABS light decided to come on. The first time the ABS light came on was a week ago before...
I have a 97 Expy EB with the stock 6 disc CD changer in the armrest and there are a couple of things that I need answered:
1. When I hit the eject button, the changer cartridge won't eject. I tried pulling it out while pushing the eject button and no go. Anything I can do to get it to...
Sweet! Well you can send me the two tan ones and one of the grey ones....I'm missing one on the front and two in the back so I dont think anyone will really look at it LOL I will send ya a PM and if ya send me your paypal addy I can get ya a few bucks for getting them and the postage. I may...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.