Search results

  1. joezek

    Vibration

    I've had a few different vibration issues that only occurred during light acceleration and they weren't the coils or plugs. One problem was the cv joint axles being worn out and very wobbly. The other problem was the torque converter clutch being worn out. To check each axle you have to put in...
  2. joezek

    Cat back Exhaust upgrade

    Update on the install: The exhaust system is built really well, excellent bends etc. The biggest problem is that they kind of threw it into a box with the absolute cheapest ******** clamps and hardware possible. The clamps bottom out and actually twisted, almost broke and the pipes are still...
  3. joezek

    SCT XCal 4

    Recently programmed my 08 Expedition with an Xcal 4. I'm currently using tunes from SSI Performance. They (SSI Performance) are very quick to respond to any and all questions via text, email and phone. Over the weekend I was all ready to tow the boat for the day, Father's Day weekend, lots of...
  4. joezek

    Cam upgrade

    I talked to (via email) Todd Warren cams about my build up. He had great knowledge and input, but right off the bat he had plans for me to change valve springs and put a high 2800 stall converter for the cam he wanted. I already told him I use it for towing not racing, and it's almost 6k lbs...
  5. joezek

    Tuning Question (human interface)

    Just wanted to follow up on what is going on with the SSi performance tune, he actually worked on the tunes for me and emailed me two files within a few hours of me paying. I can't believe it, I waited weeks from the other place. He said to let him know if it's gonna do what I need, and if not...
  6. joezek

    Cat back Exhaust upgrade

    UPDATE: Yesterday morning I had gotten an email from Realtruck saying my Gibson exhaust system was going to be delayed another 4 weeks. I called and canceled my order. Then bought a CGS exhaust system from Car ID and it's already shipped. However, yesterday afternoon at 6:00 I get an email from...
  7. joezek

    Tuning Question (human interface)

    I can't say how all the products operate but I can tell you how mine works. I have an SCT Tuner, model is X-Cal 4. Was around $400. Then you buy custom tune files and they will email them to you. You load them on your tuner and plug it into the vehicle. You then load it into the vehicle, and...
  8. joezek

    5Star Tuning came through.

    Oh ok, that's probably waay beyond what I should be messing with. The shop like the trans shop, or dyno place can plug in and change pretty much whatever they want to using HP. I know nothing about fuel maps, and what load it takes to turn off the torque converter lock during acceleration, or...
  9. joezek

    5Star Tuning came through.

    When 5 star sent you your Xcal files, were they ready to go or did they send you a "test file" first and want you to use it for datalogging etc.? I just waited for two weeks for them to send me a tune (I actually ordered 3 files) because they apparently only had one guy who was capable of...
  10. joezek

    Cat back Exhaust upgrade

    Since I just rebuilt the engine I figured I'd go ahead and upgrade the exhaust too. So after comparing brands I had originally decided on the Gibson system. I ordered the kit through "Real Truck" in Miami. Their website and order confirmation both said to expect the order in 7-14 days. They also...
  11. joezek

    5.4 Engine buildup- Any thoughts on upgrades etc?

    Well the Ford Racing cams aren't going to work out. 5 star said they'd be able to make it idle in gear with the stock converter but... No way. In gear it jumps and surges and bucks, have to power brake it. It feels the same as stock off idle to 3k. Falls dead at 4500. Basically the truck has...
  12. joezek

    5.4 Engine buildup- Any thoughts on upgrades etc?

    Looking like I can use both in the single location. I'm waiting for 5 star to give their opinion before they send a tune. Also side note... Put the comp cams on the side. I went with the Ford Racing 6550 - 3v cams.... Sorry, wanted that sound lol. If it doesn't work out I'll swap in the comps...
  13. joezek

    5.4 Engine buildup- Any thoughts on upgrades etc?

    So I have a dilemma that I'm not sure how I'm gonna handle on this buildup. The older block has one knock sensor mount. The new 08 3V's use 2 knock sensors. There's no where to mount two of them, I'm not going to drill and tap threads into the block. I've seen some other vehicles that have a...
  14. joezek

    Cam upgrade

    Oh damn, I already installed the Comp cams. Probably swapping the engine next week. The engine is on the stand right now.
  15. joezek

    5.4 Engine buildup- Any thoughts on upgrades etc?

    UPDATE on the MMR racing oil modification hose. I'm having problems fitting the hose because the heads are close to the firewall. I tried to return the kit to MMR....however they are refusing to refund my money. Even though on all their items they advertise there's no mention of this no return...
  16. joezek

    May be rebuilding a 2V 5.4 soon....

    Looking at both my cylinder heads and they're totally different from each other. The front of each head has a large cutout with the mount for the chain tensioner, and timing cover to bolt on. The back of the heads don't have anything like that. Then the intake and exhaust are specific to one...
  17. joezek

    5.4 Engine buildup- Any thoughts on upgrades etc?

    I had to replace the V10 in my 2000 Excursion a few years ago. That thing is YUUUUUGE! I barely scraped it out of the truck without pulling the hood. If I remember correctly, I think I had to pull the front tires and lowered the front of the truck a little bit to get the best angle and height...
  18. joezek

    May be rebuilding a 2V 5.4 soon....

    The heads should be assembled as far as valves and springs. The left and right were sold as two different part numbers, hopefully they're labeled. I'll check with Global who rebuilt them and make sure. I did also order a kit from MMR that connects both heads on the back side with an oil...
  19. joezek

    Grill upgrade

    Looks nice, was it painted or did you paint it yourself?
  20. joezek

    Anyone recommend decent tow mirrors?

    I recently bought a pair of Trail Ridge tow mirrors. The driver's side is ok but the passenger side SUCKS... The main problem is that the upper large mirror on all DOT approved passenger side mirrors are supposed to have a very slight wide angle built in. That's why they have the words "Objects...
  21. joezek

    5.4 Engine buildup- Any thoughts on upgrades etc?

    I'd rather look into a 6.2 but I don't have time for the changes it takes for the computer etc. Or the fuel..... Lol
  22. joezek

    May be rebuilding a 2V 5.4 soon....

    I have a nice looking set of 5.4 PI heads. They came off a 2003 F250, they look clean. It's the engine I just bought to rebuild for my expedition and I have a new set on the way. You may want to have them looked over by a machine shop, not sure on the mileage. I have them listed locally but have...
  23. joezek

    5.4 Engine buildup- Any thoughts on upgrades etc?

    No, I'm just using the 03' short block. I'm still using 3V heads, I have a rebuilt set on the way. So far I have the bottom end almost done. Heads were supposed to be here Friday but are lost / stuck at the UPS store in TX they shipped it from. Also, Amazon screwed me on my Melling High Volume...
  24. joezek

    5.4 Engine buildup- Any thoughts on upgrades etc?

    I'm in the process of building up a 5.4 3V before my current one dies (hopefully). Just wanted to share what I've done and found out so far and see what options others are doing in my situation. I've got a few minor upgrades in mind to help make this engine a little more "bulletproof" if that's...
  25. joezek

    Oil pressure adjust/relief valve

    This engine is on it's last leg and I'm halfway through a buildup of a new one. Last month I had broke a roller rocker which took out a cam lobe. THe engine ended up with all that metal in it. Then the oil pressure light started flickering at idle. I changed the oil and filter when replacing the...

Latest posts

Staff online

Members online

Total: 1,915 (members: 14, guests: 1,901)

Forum statistics

Threads
57,014
Posts
535,886
Members
54,710
Latest member
Smile2013

Share this page

Top