Specify wheels spacers or wheel adapters. Spacers I have run before on other vehicles[Mustangs] but did not go past 7/8". If you are talking about 1 1/2" spacers you have to think about what it will take to tighten the lug down and hold it there. Longer studs for one. Our vehicles have allot of...
Try unhooking to negative side of the battery and reconnect. Should reset everything. If not, check back
My parents are in Wilmington, they got over 10 1/2 in 24 hours. Crazy rain but we needed it here
Ford Expedition Gap Guards
http://cgi.ebay.com/ebaymotors/97-02-Ford-Expedition-2WD-4x4-Body-Lift-Gap-Guard-Kit-_W0QQcmdZViewItemQQhashZitem5adbab9829QQitemZ390232512553QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
A few of my past set ups
Silver 98 with 01-02 Lightnings
Blue 98[My first Expedition] with 16x10 Eagles
99 EB with 16x10 Weld Typhoons
98 with 16x10 Eagle Series 111,s
The keys are frowned on by alot of enthusiasts. Id recommend doing some research before installing them.
Are you planning on turning the front up to 3"?
X2. My old 98 with 167k did it. My 99 with 119k did it and my current 98 with 119k does it. No problems and it will be more noticeable when its cold[fall/winter] until it warms up
You should not need longer shocks, but if you feel they are due for replacement, you have a reason to justify it more. You can easily fit 33,s on 10" wheels with no lift. You can fit 35,s on 10" wheels with either or, but I went both...3" BL and 2" spacers. Chances are you will have to trim some...
Ahhh, didnt think about it that way. You have the "overall look" with the lift and blacked out. Its a preference thing obviously and I didnt picture it the way you have yours set up. Hell, if you want to do it, rock on
The side and lower molding are glued on. The first time I tried to take them off[my 99] I used heavy duty fishing line and worked it back and forth, like flossing. The line kept breaking so I just pulled the rest off. Get it started with a plastic puddy wedge and simply pull it off. You can get...
Just my .02, it will not look good. Its one thing if your intentions are to give it the "tough/rough look". I have seen it done though.
It will also some unwanted weight.
That is pretty much the only issue. I have called and emailed numerous times. Provided my phone numbers and I have been told I would get a return call.
I am going to call SCT or another tuner. I am just hoping I can get in touch with someone that has one
Sct x3
I need to speak with an actual owner or call another tuner I guess???
When loading the tune, I click on adjust settings. I believe the first option is global spark, which I do not mess with. Going through, I click on the pressure and take it to 25%. I do that for each 1-2 2-3 3-4...
Where can I find more info on this? I,m not looking to chirp 2nd gear or anything drastic, just more than what it is now. I know its hard to explain, but I want more than what it is[if anything] now but not too much.
I have 119k on it and everything is original. Though I cannot guarantee, I...
I bought a SCT X3[nib] from a well known tuner with 3 custom tunes. I like a firm up shift so in order to get it, I bumped the shift pressure to +25%[on the tuners advice]. I do not feel a difference and I have done it on all 3 tunes.:mad:
This is on my 98 Expedition with the 4.6. I am...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.