Search results

  1. Munkiebunz3

    Eliminate Sun Glare from Hood Bulge?

    There's always the non-skid tape you can buy for exterior staircases. Run it like you got racing stripes.
  2. Munkiebunz3

    Puddle lights

    Here is a photo of the whole assembly removed: 20181110_085444 by Munkiebunz3 posted Nov 10, 2018 at 9:06 AM The easiest thing to do is to very slightly pry the light from the back to expose ACCESS to the metal tabs.20181110_085330 by Munkiebunz3 posted Nov 10, 2018 at 9:06 AM I've already...
  3. Munkiebunz3

    Puddle lights

    I just replaced those bulbs & it was a little tricky. I can't remember off the top of my head but I will get back to you.
  4. Munkiebunz3

    shifter bezel

    Check this guy's post: After removing the whole trim, peek under to get at the tabs & avoid breaking it. I plan on doing this to paint it & eliminate the sun reflecting into my eyes.
  5. Munkiebunz3

    Cargo Mat

    Are you handy? Get one or two of those office entry carpets from office depot or whomever isn't bankrupt yet. You will know what to buy because they're really thick, tough yet roll tightly. Get a staple gun & overlay it on your existing upholstery. Make sure you also put the carpet over the...
  6. Munkiebunz3

    Munkie's Mods

    20181109_092430 by Munkiebunz3 posted Nov 9, 2018 at 4:09 PM Also my tires: 35x12.5r18 on 0 offset wheels. rears rubbed on the fender when I jumped off a 1ft curb I circled in Red right where it hit. I took a look inside the fender. I'm thinking I can likely cut a 1.5 inch wider opening or have...
  7. Munkiebunz3

    Munkie's Mods

    Btw, for anyone interested in replacing their bulbs I found the owner manual I have doesn't have the right designations for sone bulbs. Projector headlights: 9005 low not h11 , h9 high not HB3. Wiring connection seems to be a h11? Reverse lamps are 921 & not 3156.
  8. Munkiebunz3

    Munkie's Mods

    @JExpedition07 the clunk is on acceleration especially when making a right onto a hill. Otherwise it sounds like it's whirring/groaning once in a while during normal driving. This is after the dealer "replaced" the front diff due to vehicle shudder when accelerating during a turned wheel...
  9. Munkiebunz3

    2017 3.5l ecoboost Expedition, any known issues?

    If it's a 4x4 version you might have some issues with the 4x4 mode from curious renters throwing it in 4L on pavement.
  10. Munkiebunz3

    Out with the old, in with the new

    I love your method of trimming plastic before metal.
  11. Munkiebunz3

    Munkie's Mods

    @HawkX66 you have to glue the bracket to the bumper. Make sure you have a good way to clamp it on so that the sensors are centered and not recessed. Otherwise you might be getting false readings. @AllBoostNoEco I did the standard diff ratio calculation taking into consideration the standard gear...
  12. Munkiebunz3

    Munkie's Mods

    Is it my imagination or is the grill not vertical? One thing that I need to mention is that my shredder opinion for the bumper makes headlamp removal impossible.
  13. Munkiebunz3

    Munkie's Mods

    You got it. I don't do a lot of highway driving over 45mph (Thank you Los Angeles). I'm leaning more heavily to the 4.10 but only after I expire my 5yr/120k mile warranty. I'm also wondering if I can get a different grille now that the current bumper I have doesn't have spots for my grille to...
  14. Munkiebunz3

    Munkie's Mods

    Check your local laws. Train horns are usually illegal but truck air horns aren't. I'll get around to it one day. Probably will take photos this weekend. I'd recommend building your own set if you can find a 5 gallon pancake with extra ports & mount it in place of the spare. None of the air horn...
  15. Munkiebunz3

    Bummer

    I used this one https://www.amazon.com/gp/product/B005ZWM0R4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 I'm able to use my laptop and connect to my phone's hotspot to get the nice spreadsheets found in the Forscan forum. Unfortunately I don't know what mods you can do to your 2012. A lot of it...
  16. Munkiebunz3

    Bummer

    Revert back to the original wiring, visit the forscan section here, buy a $30 obd 2 connector from Amazon, turn on bambi mode. It will work 100%
  17. Munkiebunz3

    Munkie's Mods

    I'm going to use this thread for the stuff I've done & going to do to my 2016 Expedition El Limited 4x4. I will add pictures when I have the availability. This list will be edited to show completed vs in progress vs wants. I will also include the links to the items as I get the details...
  18. Munkiebunz3

    Really disappointed with lack of EL mods

    Did you mount it to the factory rack mounts, drill additional mount holes? The mount points are different for the EL I hear. I'm lookin to bedline the exterior. What purpose would I have in lining the interior?
  19. Munkiebunz3

    2016 Expy XLT with 202A

    Depends on what your goal is and how much $$ you have available. Accessories are hard to find & expensive.
  20. Munkiebunz3

    Waze SYNC 3

    There should be a sync 3 v3 update Plug your phone into the USB port in the console and it will work with Android auto if you don't have an iPhone like @17LimitedExpy
  21. Munkiebunz3

    2016 Expy XLT with 202A

    It's a good package to get. What does concern me is that the second owner had it for exactly a year and quickly sold/traded it just 30 miles after the water pump was replaced. It's almost as if it was driven to the Honda dealer after it was picked up from the shop (dealers are 25 miles away from...
  22. Munkiebunz3

    Really disappointed with lack of EL mods

    Unplugging a single sensor throws the whole system into fault and ceases function with an error message on the cluster. I was interested in Gardit truck liner but there isn't a dealer within 600 miles of me. I can buy the machine (black only) & starter kit for $6k. That liner is said to be...
  23. Munkiebunz3

    Really disappointed with lack of EL mods

    Wouldn't the wilco hitch gate also eliminate the parking sensor's ability to detect anything beyond the hitch gate? I looked at monstaliner & I don't think I could easily do a roll on application with the exterior.
  24. Munkiebunz3

    Really disappointed with lack of EL mods

    Just heard of it now. Thank you. Looking into it.
  25. Munkiebunz3

    Really disappointed with lack of EL mods

    Also really disappointed in shops giving me low estimates over the phone then upping the price by 2-3x once they see me in person. Looking for a storage system. Super expensive unless I build it myself. Looking for rock sliders: nope. Gotta go custom. Someone quoted $600 then did $2500 in...

Latest posts

Members online

Total: 2,191 (members: 8, guests: 2,183)

Forum statistics

Threads
57,015
Posts
535,897
Members
54,711
Latest member
malyar

Share this page

Top