Search results

  1. C

    Identify button on dash?

    Never thought of that, but since you mentioned it. What filter should i use? L
  2. C

    A/C fan control stopped

    Thanks, yes i dont have the auto.
  3. C

    A/C fan control stopped

    Thanks. What does eatc mean? Also its a 2011 xlt
  4. C

    A/C fan control stopped

    Sorry about that, thought i put the year in. Its 2011 , xlt
  5. C

    A/C fan control stopped

    The control switch for the A/C, heater fan has partially stopped. The #2 position doesn't work but #3 &4 positions work. How do i fix this?
  6. C

    LED Turn Signal Bulbs - advice

    My turnsignals have normal flash until i turn on parking/headlights, then they hyperflash. I have resistors on the front led turn signals. Anyone know what i should look at?
  7. C

    How to add remote start using forscan

    Would this work with a 2011 xlt?
  8. C

    Oxygen sensor

    Is the Bosch brand oxygen sensor considered a OE part?
  9. C

    Expedition rough idle and obd codes

    The engine is the 5.4
  10. C

    Expedition rough idle and obd codes

    Would a bad camshaft position sensor cause a misfire & o2 senser code? Even after changing spark plugs, coil pack and injector. Its in a 2011
  11. C

    Blinking headlight

    For now, i put the original bulbs in. Figure i dont want people wondering why im flashing lights. The not flash.
  12. C

    Blinking headlight

    Recently the right headlight started blinking, also turn signals will flash normal when lights are off but hyperflash when they are on. 2011 xlt with LED headlights & parking/turn signals (load resistors on both front. Someone suggested it is a lose ground to the headlight. Does anyone know...
  13. C

    Misfire

    May have found 1 of 2 causes. After new plug put in, still had a code, moved the coil pack, code followed the coil. Put a new coil pack. No more CEL. (For now)
  14. C

    Misfire

  15. C

    Hyper flash issue

    Thanks. Any clue where i should start looking?
  16. C

    Hyper flash issue

    I got led turn signals on my 11 expi. Also installed the resistors so they dont hyperflash. Have been working up untill last week. They flash the normal rate if the parking/headlights are off, but hyprrflash when i turn park/headlights on. What should i be looking at or for? Thanks
  17. C

    Intake Manifold Removed....Now What? (2014 EL)

    Are you able replace the gasket, or do you need to replace the manifold?
  18. C

    Rocker panel time, 2011 EL

    I have a 11 xlt. When clicked on the link,it said that part didn't fit.
  19. C

    Dashcam add

    Thanks everyone, I got put in & working. Turned out (stupid me for not checking first) a bad ground connection.
  20. C

    dashcam power

    Thanks. Got it working.
  21. C

    Dashcam add

    I want to hardwire a dashcam. I put an "add a tap" in fuse 16 (acc) & 34 (batt). When checked with a multimeter they had power but not over 12v.with the power cord attached, there is no power to the camera. Should I use different fuse slots or could it be a bad supply cord
  22. C

    dashcam power

    Looking to hardwire a dashcam. Will be using "tap a fuse" connector. Which fuses are good for switched & unswitched in a 2011 xlt
  23. C

    Led hi/low beams reversed

    I spun them 180. Still issue. I did see a YouTube video about switching the wires around.
  24. C

    Led hi/low beams reversed

    Installed LED headlights (got from Alla Lighting) now when switch is on low-lights are high. When switch is high-lights are low.
  25. C

    Misfire

    Never really went away. Yes it's the drivers side next to firewall.

Latest posts

Staff online

Members online

Total: 4,933 (members: 13, guests: 4,920)

Forum statistics

Threads
57,018
Posts
535,910
Members
54,714
Latest member
Budman55

Share this page

Top