If you take your hand and pry up the door sills there is a channel below the door sills to run your cable along with the other cables or harnesses and everything is completely hidden.
I made my own, the subwoofer I got from a savage yard with the plug with 6 inches of wire still attach so like I stated earlier I added 14 foot of wire to each wire coming off the plug and label each with color and pin number on both ends of the wire so I wouldn't get confused with which wire go...
I got my ford remote start system (Genuine Ford Oem part) off of ebay for around $100.00 brand new, but the local dealership said that they contract this type of work out. It took the shop that they recommended, 6 hours, I think this was done to run up the labor. On the FOB , all I do is press...
Yes, if your radio support it with a plug on the back, its a small 16 pin plug on the left side of the radio when you are looking at it from the back. the far left. This from the back of the newer model navigation radio but the radio with the 6 disk changer built-in should have it on the back...
It's not prewired on the XLT, you have to make your harness and it consists of 5 wires about 14 feet long. I know I done it. I checked with the ford dealership and was told this harness was not available.
By the foglights under the bumper if you're lying on your back on a creeper and look straight up under your headlights, there is a flat portion that you can use, apply some super duty 3m double stick tape to the ballast and clean the area that you will apply the ballast to with some alcohol and...
I got my dealer to replace mines under warranty in 2005 but they only replaced 3 of the panels and lied about the fourth. I took them off three weeks ago and paint all of them so they would match. They came out excellent, no light or dark shadows and it made the truck look new again. I'm in the...
Go Harbor Feight and get Auto Trim tool remover kit (costs $4 and something) it has 4 pieces in it. I put some duct tape above the top of the trim on the door and took the tool with an angle like a crowbar and carefully pry the trim out, looking down to keep the split part of the prying tool...
Well I finally got the right sirius dlp module for the navigation unit after reading thru a lot of different forums. My old sirius unit and the wiring harness would not work and I couldn't get a wiring diagram for the sirius module to rewire my old harness, The harnesses are the same length...
The depth of the radio from the back to the front is 7 1/4", all of your other measurement match and I don't think you can put a line out/in on the older model navigation. On the new model that I install, the programmer ask and I told him to install it. Look at the picture and you can see the...
Sorry, thevalleyboy, I gave you the wiring for an 03 expy, I got mix up after looking at your pictures, I thought they only put that model navigation unit in 03 and 04 model and then change it out for the model I put in my 03 which is the new model. Oh, by the way, thanks for the measurement of...
In your picture, the black plug (C290b) on the back of the radio is for parking aid signal, audio/climate control switch, dvd player, speed sensor and audio protocols it is not for the subwoofer. The light green plug (C2188d) next to it is for the subwoofer, rear audio control and audio protocols.
Again, thanks Lane24 for the info, I had the followings codes on the 4.6l also, P0171, P0174, P2195, P2197 I took the cover off and reach behind the throttle body feeling for the hose end when I felt a dimple and placed my finger on top, I felt the suction and the truck idle smooth out I knew I...
The IAC is on top of the throttle body it has 2 bolt and a wire connection plug. I hope this is what you are looking for. You clean it with carburator cleaner, they just get carbon up, I clean mine and it went about a year before I decide to replaced it. It costs $144.00 at the dealership I...
Like racenut said "Walmart is the place for batteries". I have four vehicles and all of them have Walmart battery with 3 years free replacement before they are pro-rated. Walmart has a good return policy.
If the battery hasn't been changed since new that about right, my truck did the same thing, all you have to do is look and see if the eye is green if its the original, if not the battery is bad.
Be careful when trying to untighten or tighten because mine snapped off at the bracket and everytime I go to the ford dealer I keep forgetting to get one to hold the assist strap or handle.
When I replaced my grille with a billet grille the original grille on my 03 XLT had 9 tabs with clips, 2 on each side and 5 across the bottom, then 2 push down tabs at the top with no clips. Not hard but requires some patience to keep from breaking something. Take your time is the key.
UPDATE 2
Got the radio back yesterday from the programmer and install it, reinstall the dash bezel. Still need to work on the dash bezel, must remove another quarter of an inch from the top and get the right overlay to get a professional look.
Notice the Ford emblem instead of the...
Well, zeebot I hope this helps. It's the same for both engines on the 03's. It should be inside near or on the brake pedal. This is out of my service manual.
UPDATE!
The navigation unit has been shipped and arrived at the programmer in Dallas, the programmer says he is looking forward to programming a hardwire version instead of ms-can. If there is no problems I should have the unit back within 2 weeks. I have to finish modifying the dash bevel...
Expedition is right, the f-150 is bolted to or part of the hood where as the expy attached to front bumper/fascia. Your friend might already know this and trying to play you. Just joking!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.