Search results

  1. jrjr

    Loosing VSS signal causing speedometer non-op and shifting issues

    I have an issue with my 97 tach and have deemed it to be a bad cluster. In talking with a bunch of service departments I am told that you can drive just fine with no cluster so I would bet its not the cluster. As always though, watch out for Murphy.....
  2. jrjr

    issues with oil!

    I'm not impressed with my dipstick at all in my 97, Its round and flimsy with a larger flat area to read the oil level. The oil level reading varies drastically from one side to the other..... very weird.
  3. jrjr

    Got My Expy..

    This must be what the 97 and 98's have from the factory since they have a 2WD position on the switch.
  4. jrjr

    Spotted this monster expy at the **********

    Like Howard from Big Bang says... I'm the small package that good things come in! :smokin:
  5. jrjr

    what to replace at 170k

    I just did mine, and I was scared to drive it once I saw rust holes. If they let go, much more damage will happen. You could possibly lose control and wreck the truck! This is what I bought and I am very happy with both price and quality -...
  6. jrjr

    looking to buy 2000 Expedition

    Check the sticky at the top of page http://expeditionforum.com/showthread.php?t=10741
  7. jrjr

    replaced steering box - steering backwards now

    I'll bet that's a major understatement!! Where did you get this steering box?
  8. jrjr

    Where to find LED lights

    Never done it myself but this may be of help.... check google too http://www.popularmechanics.com/cars/how-to/maintenance/4221212
  9. jrjr

    Push bumper for my 2001 Expedition

    It does look good, I could run one in the summer...
  10. jrjr

    lowering my 02 and tire wheel question

    Man I must be getting old! I cannot see how in the world a truck could look dope...... lol :big_banana_Dance:
  11. jrjr

    No Heat

    If your engine is stock I would stick with the factory recommendation. Not sure what it is for your vehicle but they spec it for a reason. Ford engineers design the engine to run at a certain temperature for reasons of performance, economy, longevity, and others. Don't second guess them without...
  12. jrjr

    Water Pump

    If it were me I would not get that, I would stick with stock. Rock Auto has pumps from $32 cheapo - $90 Motorcraft..... but thats just me.
  13. jrjr

    Trailing arms

    Oh and as an FYI for anyone reading this and about to do this job...... Do one side at a time. Once the old one is off, put a bolt through one end of the new one in place where it goes. You will notice that the other end looks short. On mine it was due to the drive shaft weight pivoting the...
  14. jrjr

    Headache!!! 98/4.6

    fyi About 14mpg with my 97 so far.
  15. jrjr

    Trailing arms

    Well, after reading about the 15 sawzall blades I opted for the cutting torch. Took a couple hours but its all done. Thanks for the responses though. Made a helluva mess!! There were just pieces left over, nothing worthy of photographing. They were worse than I thought.... good thing its done.
  16. jrjr

    Trailing arms

    Anybody else care to share how they got their bolts out after taking the nuts off?
  17. jrjr

    Trailing arms

    I could yea.... I got the nuts off with no problem..... I think I will wedge a bit between arm and mount and stick my sawzall blade in and cut boths sides of the bolt off. I know the front one will move a little. I don't imagine they will cut easy but at least its a plan.
  18. jrjr

    Trailing arms

    I received the new ones and am in process of removing old. How did you guys get your bolts out? I have tried beating them, air chisel, impact and turning them, all they do is bounce in the rubber. I was almost thinking about a cutting torch and cut the whole arm and bolt out..... hate to do that...
  19. jrjr

    Door Ajar

    yep. the switchs are in the latch mechanisms.
  20. jrjr

    Different tire size

    Here's a cool little app for comparing tire sizes http://www.wildweasel.ca/HowTo/Auto/TireCalc.aspx
  21. jrjr

    PMT's

    Nasty looking.... way worse than mine I think. I will post some pics when I get mine off.
  22. jrjr

    Different tire size

    I put Mastercraft on mine. Plowed once so far and they grip really well.... I'm happy
  23. jrjr

    PMT's

    Near as can I find, the bolts for my 97 are 14mm X 4" Grade 10.9. Should be fun finding them! Corrections welcome. I just ordered the $145 ones from EBay.
  24. jrjr

    this part of the manual does not make sense (HVAC)

    A bit chilly this time of the year eh? :naughty:
  25. jrjr

    Turn signal/wiper switch on an 01 Expedition

    If you are working on your signals you will be needing this..... http://kalecoauto.com/index.php?main_page=product_info&products_id=6

Latest posts

Members online

Total: 2,273 (members: 5, guests: 2,268)

Forum statistics

Threads
57,019
Posts
535,925
Members
54,719
Latest member
jtebbe0529

Share this page

Top