Search results
-
Picture of 2013 Integrated Brake Controller?
That's the question I've been wondering since they announced they were putting it in the 2013 MY. So far I haven't been able to find out. My guess would be NO because I believe it is tied into the GEM unit and shows up on the message center. Maybe a reflash is required ? It would be nice if...- RI-Matt
- Post #7
- Forum: 3rd Gen Ford Expedition Interior
-
Picture of 2013 Integrated Brake Controller?
Here you go. I've been looking into this for awhile but came up with nothing as far as if it can be retrofitted into an 08. Matt- RI-Matt
- Post #3
- Forum: 3rd Gen Ford Expedition Interior
-
Liquid spill into console shift area
There is no reason to remove the chrome around the cupholders, it doesnt hold anything together. You only need to remove the chrome around the shifter, the black rubber tray to access and remove the bolt, and then carefully pry up the bezel. You can GENTLY pry the shifter shrouds off the...- RI-Matt
- Post #4
- Forum: 3rd Gen Ford Expedition Interior
-
Finally finished my headlight projector retrofit (LOTS of PICS)
Jason the headlights look great but I was wondering what it would look like with the chrome reflector housing blacked out too as it's not needed anymore with the projectors. Matt- RI-Matt
- Post #8
- Forum: 3rd Gen Ford Expedition Exterior
-
Dissolving carpet in 07
Gary there were two TSB's I had them do. TSB 08-22-7 - had to do with down shift bump and hesitation, basically they reflash the computer, about 1hr of time. Cost = $92.50 TSB 09-6-1 - squawking noise with forced downshift. Replace the overdrive friction plates. This involves 11-12...- RI-Matt
- Post #6
- Forum: 3rd Gen Ford Expedition Interior
-
does my stereo have bluetooth
Nope. The factory bluetooth feature was added starting in 09. The "phone" button prior to that does nothing. Atleast your radio says "no phone" when pressed, on the factory NAV units you press it and nothing happens. Ford does/did make an add-on that does bluetooth through the factory...- RI-Matt
- Post #2
- Forum: 3rd Gen Ford Expedition Audio & Electronics
-
Paint Bubbling, We need EVERYONE to register a complaint! READ FORDS RESPONSE!!!
My old 02 Expy Eddie Bauer had the paint bubbling on the hood. It also had rust forming by the gas filler door. Feel better now ? :Big Laugh: Matt- RI-Matt
- Post #55
- Forum: 3rd Gen Ford Expedition General Discussion
-
Paint Bubbling, We need EVERYONE to register a complaint! READ FORDS RESPONSE!!!
Ford is well aware of the cause of this problem and has lost lawsuits over it. But the odds are in their favor that most people won't / can't afford to go down that route. To me, the attached pdf. seems like an admission of guilt that it's their fault. ( BACKGROUND - Ford's Scientific...- RI-Matt
- Post #52
- Forum: 3rd Gen Ford Expedition General Discussion
-
OOOPS...Need a new front end.
Aren't the stock hoods aluminum ? Same with the rear hatch. Matt- RI-Matt
- Post #7
- Forum: 3rd Gen Ford Expedition General Discussion
-
oem entertainment problems
Here you go. Matt- RI-Matt
- Post #6
- Forum: 3rd Gen Ford Expedition Audio & Electronics
-
Ford ETIS webpage - shows what your truck has
:cheers: Pretty cool. Lots of info on your vehicle. I hadn't seen that site before, good find. Matt- RI-Matt
- Post #2
- Forum: Off-Topic General Discussion
-
Window auto up...
Here you go ( see attached pdf) Matt- RI-Matt
- Post #2
- Forum: 3rd Gen Ford Expedition General Discussion
-
-
Have an 08 with lots of wind noise
If you have an Eddie Bauer then the textured one is the original one. Only the Limiteds came with smooth finished ( color matched ) Don't know if this TSB would apply as it was for 2007 MY TSB 07-16-15 •WIND NOISE - A PILLAR AREA - BUILT BEFORE 5/7/2007 Publication Date: August 7...- RI-Matt
- Post #4
- Forum: 3rd Gen Ford Expedition General Discussion
-
Factory amp
On the Expys the head unit amplifies the door speakers with a seperate amp for sub. ( Navigators have the THX DSP unit which everything runs thru ) I believe there maybe a seperate amp for the door speakers on the 09 up Expys with NAV units ( different manufacturer then 07-08 ) Matt- RI-Matt
- Post #2
- Forum: 3rd Gen Ford Expedition Audio & Electronics
-
Dissolving carpet in 07
Gary I learned to put little faith in "Certified" preowned. I purchased mine as a certified preowned from the Ford dealer where the vehicle was originally purchased and serviced. While it was a real clean vehicle there was a few things that should have been taken care of prior to being put out...- RI-Matt
- Post #4
- Forum: 3rd Gen Ford Expedition Interior
-
Dash Illumination
If you are talking about the white line on the actual knobs you turn for the headlights and transfer case (4x4) then NO they do not light up. The transfer case position should show on the dash in anything other than 2WD (4x4 AUTO, 4H, 4L ) no need to look at dial. The homelink buttons on the...- RI-Matt
- Post #2
- Forum: 3rd Gen Ford Expedition Interior
-
Dissolving carpet in 07
Gary, sounds like the PO didn't take too much care of the carpet. It shouldn't be wearing out like that this soon. The locations sound odd too as most wear and tear happens on the drivers side. I've seen where some people just don't care and never even vacuum the interior. To me my vehicles are...- RI-Matt
- Post #2
- Forum: 3rd Gen Ford Expedition Interior
-
Driver seat torn in 09
Lack of care / maintenance. Most people drag their ass across the seat getting in and out. Plus wearing dirty jeans doesnt help. If the leather isnt cleaned and conditioned on a regular basis then every time you get in and out it's like taking sandpaper to the leather. I put over 193K on my...- RI-Matt
- Post #2
- Forum: 3rd Gen Ford Expedition Interior
-
New Expy got Questions
The auto dimming rearview mirror only dims when it detects light coming from the rear, such as another vehicle behind you. You can try testing it by shining a light at the small holes at the bottom of the mirror at night ( see crappy photo below) The mirror should dim, then while continuing to...- RI-Matt
- Post #3
- Forum: 3rd Gen Ford Expedition General Discussion
-
Mach sound system sub isn't working?
Had this happen to my old 02. It was the amp. Swapped it out with one off ebay and was fine after that. When the woofer goes it will make a buzzing annoying sound like totally distorted. The amp mounted to the sub enclosure is just for the sub ( not a 5 channel ) Matt- RI-Matt
- Post #8
- Forum: 1st Gen Ford Expedition Audio & Electronics
-
Removing eddie baurer pinstripe
Just an FYI you can order a new stripe kit from Ford. Each side goes for about $68 (covers from the front fender to the rear quarter) http://www.tascaparts.com/parts/1999/FORD/EXPEDITION/?siteid=213668&vehicleid=1354531§ion=BODY%20HARDWARE&group=STRIPE%20TAPE Matt- RI-Matt
- Post #12
- Forum: 1st Gen Ford Expedition Exterior
-
2006 Expedition Audio Input Center Console
My guess is that input jack isn't factory and maybe the previous owner had a different stereo hooked up then threw the factory radio back in before selling it. What's the green switch do ? I've seen where people have modified the factory radio for aux input and it plays through the...- RI-Matt
- Post #3
- Forum: 2nd Gen Ford Expedition Audio & Electronics
-
Regular or Premium
For previous generations maybe but the 3rd gen Navs use the same motor as the Expys. Matt- RI-Matt
- Post #88
- Forum: 3rd Gen Ford Expedition General Discussion
-
S&B Cold Ait Intake - any thoughts
VA epxy, isn't that just hood sensor for the remote start ? I would have just relocated it or bypassed it altogether. Its only there so you cant remote start the vehicle with the hood open. Matt- RI-Matt
- Post #14
- Forum: 3rd Gen Ford Expedition General Discussion
