Hey Shantheman,
You have heard from some people who don't think it's a big deal but there is no way to tell if the wheel IS compromised unless you have Xray vision. I know it's not cheap to replace the wheel and tire but you can't put a price on losing a family member. Consider your run in with...
Don't take advise from this forum based on your photo. Go to a reliable tire shop and have them check it.
Give yourself and family peace of mind even if it means buying a new wheel and tire.
question about using CRC 05319 GDI IVD Intake Valve & Turbo Cleaner.
I have an electrical eng degree and worked on a variety of electronic/electrical products for 45 years but I always had a service manual for reference however, my 2017 Expy is the first vehicle I've owned with so much...
Go to
https://www.discounttire.com/learn/wheel-configurator?&ef_id=EAIaIQobChMI-ZnWsuTU6QIVnP3jBx2G3AzbEAAYASADEgJCgfD_BwE:G:s&gclid=EAIaIQobChMI-ZnWsuTU6QIVnP3jBx2G3AzbEAAYASADEgJCgfD_BwE&ef_id=XpoEgwAABciHD-dl:20200527193243:s
OR...
I have a 2017 XLT and my fob has a button to unlatch just the glass but you have to push it twice. That button has a symbol that looks like a car trunk with 2x.
Hey ATXDuD,
The great thing(s) about working on your vehicle is you get creative, save money and it makes you feel good. The tips from
hopefully will save you $$
here are two articles
one is about set-ups for PCV/catch can mods.
Scroll down to the 9th post and download the pdf at the end
https://www.challengertalk.com/threads/can-length-of-catch-can-hose-affect-performance.428258/
and
the other general info about PCV systems...
Has anyone tried cleaning the intake valves by doing an injector cleaning fluid drip into the intake? A long time ago I had a 1978 porsche 944 and as part of the tune-up my mechanic would open the hood, hang a bottle of injector cleaner and allow it to drip into the intake while the car idled...
Now that I‘m more educated (or confused) after reading this thread, I have more questions.
1) If the purpose of the catch can is to “slow" the flow of dirty air from the PCV to the intake, would it make sense to use a smaller ID hose between the can and intake to reduce the air volume so the...
I don't have power folding seats so I can't see first hand what you have in the video but after looking at your video maybe you could pull the wire another 1" through the wire tie OR put a piece of thin plastic tube over the rotating bar.
If your terminal is getting hot there is some resistance between the battery post and the terminal on the post(loose bolt, oxidation, etc) OR between the terminal and the wire (bad crimp, oxidation, etc. Either of these could also prevent the alternator from fully charging the battery and...
What is it that you are trying to plug in? If you get down to the nitty gritty, you have to consider the power factor (PF) of the load you are trying to power. I would assume that Ford was thinking people are going to plug in an electronic device and not a light bulb or heater. Also, keep in...
Remember that different years use different plugs, covers, filter locations, etc. and I get that everyone has an opinion on the best way to change your oil so take the comments that apply to your specific year and sort out the data then decide.
Please don't recommend anything you haven't done...
I never used the rack since I got my 2017 XLT so I removed it and plugged the holes. I shoved a small piece of 3/8 round foam insulation(backer rod) into the well nuts to cover the threads, then I filled the space above the threads with a squirt of silicon sealer and smoothed it even with the...
So you had a Fumoto and went back to the plug? I can remove the nut in a few seconds too, it's the prep ahead of removing the nut and the oil that misses the catch pan that I don't like.
Can you tell me the Derale p/n or thread size for the adapter that threads onto the engine block?
I have a 2017 XLT and I have been doing my own oil changes since the 60s I can't believe how long it takes to change the oil on my Expy. I just installed a Fomoto F107SX drain valve on my last oil...
I know I'm repeating some of the comments but, AGMs are sealed and will vent(one way out) if the battery is over charged. They are not made to be "topped off" with anything. If your vehicle charging system repeatedly over charges and vents the pressure(along with gases) eventually you loose...
I do NOT have a wiring diagram for 1999. This info is based on common sense 12 volt wiring.
You would make the connections at the bulb connectors (not at the switch) that’s the point where 12 volts can be measured when you turn on the parking or high beams. If you try to do this at the light...
I stumbled across this https://www.fordforumsonline.com/threads/ford-expedition-radio-wire-diagram.3884/
If this is what you need, it looks like the switched power comes directly from fuse, through 2 connectors and into the radio. Hope it can help.
Have you tried using a heat gun or hair dryer to warm small individual areas inside the Expy or under the hood when you have the problem? It is a weird problem but I was thinking maybe the freezing cold makes one of the connections points contract or shrink in a way that it's breaking the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.