Search results

  1. 1

    Silver trim touch up paint?

    Behr Premium, Metalic, Soft Iron is a very close match, Home Depot. You might need a clear coat.
  2. 1

    2019 Expy AC fan briefly surges during acceleration; Fixed-loose turbo inlet pipe

    Problem found. I had a turbo inlet pipe pop out. The clamp was loose. Popped out just enough but still semi in place. Reseated pipe. Fixed
  3. 1

    5.4L Timing Chain Set; CLoyes or Ford OEM?

    @erickperez regrettably, I do not recall where I read that. I think it was info from either a YT or FB reel mechanic.
  4. 1

    2019 Expy AC fan briefly surges during acceleration; Fixed-loose turbo inlet pipe

    Hmmm, that might be it as I had to move that assembly around. Will definitely check that out tonight when it (wife's daily driver) and I are both home.
  5. 1

    2019 Expy AC fan briefly surges during acceleration; Fixed-loose turbo inlet pipe

    2019 Expy XLT, 136K. During my test drive after installing new timing chains and tensioners (P0019, P0018, P052C, Bank 2 timing chain slipped a couple of teeth on the crank sprocket), while my AC is set to manual, dash vent, recirculate/Max AC, the blower will surge and blow through the defrost...
  6. 1

    5.4L Timing Chain Set; CLoyes or Ford OEM?

    Update, I went with OEM after learning that the pins on the Cloyes will eat into the block/cover. Truck is at 293k now, still quiet.
  7. 1

    Need a replacement catalytic converter recommendation

    Update. I held off on the cat for now, but Magnaflow will be the choice when I get there. I'm thinking, dont know for sure, but maybe my my 02 code is related to air coming in from the exhaust manifold. The last manifold bolt closest to the firewall is broken. I'm goinng to fix that first...
  8. 1

    Swapping a 6R180 transmission with a different model year

    appreciate the response S20Workstation4
  9. 1

    Swapping a 6R180 transmission with a different model year

    2009 Ford Expy XLT, 4WD, 285K miles. Trans is starting to slip/stutter at all shift points. Filter change at 225K. I could address the common problem ms and swap out the torque converter, lead rail, and rebuild the valve body but am thinking of just swapping in a used, lower mileage...
  10. 1

    Need a replacement catalytic converter recommendation

    09 Ford Expy, 275K. Code P0420 "Catalyst System Efficiency Below Threshold Bank 1. Given the age, I think replacement cats are due. Who has had success with aftermarket cats here, and what Manufacturer did you use? Thanks in advance.
  11. 1

    Body Mountings Expedition 2007

    I bought the Dorman's for the four center last year, and have no problem since. I followed the YouTube below. I was careful, but still had one body mounted nut break free. I had to remove the front drivers seat and drill a hole in the body/floor board to get a socket on the nut to get the...
  12. 1

    Remanufactured 10R80 Recomendation

    2019 Ford Expedition, 122K. Looking to install a remanufactured 10R80. Who here has had success with a 10R80 reman? Ive got a quote from Fraser for 3700 before core, and a local shop quoted 5500 for a Jasper. thanks in advance.
  13. 1

    Ignition switched fuses

    passenger floorboard fuse panel, 43 through 46 will work.
  14. 1

    09 Expy XLT-what fuse for "switched power"

    After some time with a test light, I found that on my 2009 Expy, fuse 43 through 46 are switched/ignition source. Hope this helps someone else in the future.
  15. 1

    09 Expy XLT-what fuse for "switched power"

    09 Ford Expy, XLT, 250k. Installed a Boss Double Din, Apple Carplay. Currently tapped into the cig lighter/constant power for convenience. I have killed the battery twice now, and as the stereo will come on when locking, or if Im near it with my phone and it syncs for Bluetooth. What...
  16. 1

    09 5.4L 3V Ignition Transformer Capacitor positioning/orientation?

    thanks. some reason I was thinking sensors, not capacitors. I got in a hurry finishing this up.
  17. 1

    09 5.4L 3V Ignition Transformer Capacitor positioning/orientation?

    Finishing up timing chain set, and forgot which way these things go. Ive done a ton of googling, but looking to make sure. The black square with a notch thing in the pic. anybody?
  18. 1

    5.4L Timing Chain Set; CLoyes or Ford OEM?

    Johnboneske, sorry I missed your post, that would have helped. Can anybody advise me the orientation of the Ignition Transformer Capacitors for an 09-10 5.4L? the black plastic square with a notch missing and a wire protruding. thanks, mv
  19. 1

    5.4L Timing Chain Set; CLoyes or Ford OEM?

    141k at breakdown.
  20. 1

    5.4L Timing Chain Set; CLoyes or Ford OEM?

    09 Expy EL, busted, just now started on the tear down but haven't got eyes on yet as exactly what broke, but thinking its the right side tensioner/guide popped/cracked the valve cover. There was no catastrophic failure and it limped a mile before being parked. I'm going to use a the high flow...
  21. 1

    help identifying a part

    Pulled it and re installed for experimentation. Have had a long time vacuum issue where I lose vacuum boost to the brake booster when braking at speed or acceleration. I’ve replaced the booster and master cylinder and did a full bleed It appeared to tie into the vacuum/ brake system from behind...
  22. 1

    help identifying a part

    Much Thanks!!! Since I have you on line, any clue as to what problems it causes when failing?
  23. 1

    help identifying a part

    Anybody know what this part is? Sits on top of the motor, behind the air intake. Part number is too tiny to read
  24. 1

    09 Expy EL Vacuum loss to power brake booster at speed

    I'm thinking the new booster is good, I'm thinking either a vacuum line check valve(s) or maybe a leaking hose that goes at speed/higher pressures.
  25. 1

    09 Expy EL Vacuum loss to power brake booster at speed

    All, 2009 Ford Expedition EL. Replaced both the power brake booster and master cylinder recently; master cylinder was leaking into the booster. Before, and after, at highway speed, or on/after heavy acceleration, I lose vacuum boost to the brake booster and experience a hard brake pedal...

Latest posts

Staff online

Members online

Total: 4,797 (members: 14, guests: 4,783)

Forum statistics

Threads
57,018
Posts
535,910
Members
54,714
Latest member
Budman55

Share this page

Top