03 expedition won't crank won't start

[Fudge1218]

My expedition recently has started where It doesn't start, it had happened a few times, but usually it will start after the 2nd-3rd attempt, not the starter relay, and I swapped relay 203 with the trailer lamp relay, I had the PRND error and realized it was that relay, but now it just won't start at all, not the battery, everything works like normal when I go to start it except it doesn't start or even crank anymore 4.6L engine Eddie Bauer trim

 

[Bedrck47]

Have you tried to start the expy with the gear selector in Neutral rather than in Park

Also if you have a tilt steering wheel try moving the tilt and turn the key at the same time

 

[Fudge1218]

I tried it neutral, but not while tilting the steering wheel

 

[Bedrck47]

Can you read and understand wiring diagrams

Do you have a Volt Meter

 

[Fudge1218]

Yes, and I do

 

[Bedrck47]

Start checking for voltage

Print of your starting circuit attached

 

[Fudge1218]

Yes, and I do

 

[64C10]

Mine did this and it turned out the starter had burned through the power lead at the solenoid mounted on the starter. It only takes 10 minutes to disconnect and inspect.