2011 Ford Expedition Suspension Lift Kit

[gma3456]

Does anybody know if there is (or when there will be) a 4" suspension lift kit for a 2011 Ford Expedition 4x4. I was able to find a few 3" body lift kits but I'm looking to purchase a suspension lift kit.

Thanks

 

[jacks3am]

You found a body lift? are you sure? the only suspension lift I know of is the 3/2 lift the moderator solisimo has it http://www.fordexpeditionforum.com/album.php?albumid=26&pictureid=549

 

[SOLISIMO]

If you found a body lift please let us know. The 07+ expys have a redesigned rear end so none of the suspension components are interchangeable. Now the front suspension is the same as the F150.

 

[tonydiv]

I think this is the kit you are talking about

http://www.truxxx.com/product/ford/108030-2005-2011-Ford-F350

 

[gma3456]

Here are the links to the two body lift kits that I found for the 2011 Ford Expeditions.

http://www.truckcustomizers.com/products/readylift-suspension-lift-kit-ford-expedition.html

http://store.fatbobsgarage.com/_ford-expedition-275-lift-kit-4wd2wd-2003-2011-p6459.aspx

 

[SOLISIMO]

Those are not body lifts they are coil spacers. I have the 3/2 right now but you cant get any higher than that.

 

[tmajikman]

Those are not body lifts they are coil spacers. I have the 3/2 right now but you cant get any higher than that.

Its good to have a 1st gen.

 

[panda24619]

Its good to have a 1st gen.

DAM STRAIGHT! haha

 

[SOLISIMO]

Its amazing how many threads we have of 3rd gen lifts and all I hear the companies saying is that there is no demand.

 

[jacks3am]

lol true, make ur own!

 

[SOLISIMO]

lol thats too much money. Id be happy with a 6". In reality I can do a procomp 6" in the front and some how figure out the back but thats gonna be big bucks too.

 

[jacks3am]

looks like a solid axle swap back there!

 

[treycool94]

we need a vendor that can make stuff like this...

 

[tonydiv]

Making it is the easy part. It's the engineering and testing that costs all the dough.

 

[walnuts4x4]

I'm sure you could make a body lift for one of these fairly easy.... they haven't gone to a uni-body have they?? basically get the spacers between the body and frame, get metal extensions for all wiring harness and brake harnesses... then a steering extension piece (same for almost all trucks)... then the extension for the fuel filler neck... basically cut the hose install a metal pipe and reclamp the hose..... can't believe they haven't made one yet...