99 epedition lift

[Smooty]

I have been looking around to see if there are and 3'' lift kits for my rig but i cant find any. they are all for newer models of the expedition, any suggestions?

 

[Lane24]

Not sure where you've been looking around but......You can do a 3 inch body lift, or you can do 3 inch rear coil spacers in the back and a torsion twist in the front that will get you near 3 inches. Other than those......... not sure what you can do

 

[Smooty]

ok thanks Lane

 

[daoud el-massri]

Go to fat bobs garage he has low budget lifts starting just under 450

 

[xtinc7ion]

Go to fat bobs garage he has low budget lifts starting just under 450

Fat Bob's doesn't have anything for us 2wd expys, in fact from my uneventful searching, not many do. I have yet to find a decent lift/lvling kit anywhere that will actually work with my 2wd coil rear and 2wd coil front

 

[walnuts4x4]

3" usually is spacers and TT... or a bodylift.... unless a 2wd then there is alternate routes.... if awd then you can be like me...lol

 

[xtinc7ion]

3" usually is spacers and TT... or a bodylift.... unless a 2wd then there is alternate routes.... if awd then you can be like me...lol

Which alternate routes are you meaning, for us 2wd guys.

 

[walnuts4x4]

on the f150online forum there is a huge 2wd lifted expy.... I believe he used a 2wd f150 lift kit for the front and then lifted expy springs on the rear.... I'll have to search for him when I get some more time

 

[xtinc7ion]

on the f150online forum there is a huge 2wd lifted expy.... I believe he used a 2wd f150 lift kit for the front and then lifted expy springs on the rear.... I'll have to search for him when I get some more time

Thank you, I found him and sent him an email, hopefully he will respond soon. From looking through his info and threads, I can see that he started out the same way I will be. Using a 3.5" spindle with a 3" coil spacer and a 6" coil spring lift in the rear. I will share more when I figure more out. Thank you for the help!

 

[walnuts4x4]

I've tried to get him to come over here but he hasn't joined us....lol

 

[xtinc7ion]

Would be nice. He seems to have some decent experience. Can't wait to hear back from him.

 

[dr8082]

I gave my son my 98 expedition 4x4, he wants to lift it, with some 4" pucks I have in my shop from an old jeep. How hard is it to install a body lift on an expedition?