justinj229
Well-Known Member
What is the model number for
The wheels on those? Can they be bought as a separate upgrade
The wheels on those? Can they be bought as a separate upgrade
Black accent package 20s wheels
- Thread starter justinj229
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Not sure what black wheel design you are looking for and for what year vehicle. I have just spent months trying to figure this out for this design and I just bought a set. Have not installed them yet. When I do, I will run them a month or so first to make sure they are "true" and balance properly. THEN, only THEN, I will be selling the 22" wheels seen on my picture, which looked great, I just did not want 22's.
The real issue is with the rear wheels and the length of the axle spindle to be able to get the center cap to fit correctly, they must be wheels that were sold on an Expedition. The F150 wheels, which can look exactly the same, but do not fit the center cap will bolt on fine as the 150 and EXPY both have 6x135 bolt patterns and a 44 mm offset. The set I just purchased has the following numbers stamped on the back. JL141007MA which will fit because they have a raised center hole to accommodate the longer rear axle spindles. The set pictured, is the first set I bought and they did not have the raised center hole and I sent them back because the vendor "ASSURED" me they work with the EXPY. Well, they did, except for the cap issue.
Here is what I think I know, because it is very confusing and this only applies to the wheel design I have pictured here. There may be other designs, but they will all have different numbers. Other numbers that "should" fit are:
MPN #
JL1Z1007FA
JL1Z1007E
JL1Z1007K
JL141007MA
Also known as:
Part #
10143 (not 10172, that was for the F150's only)
Do your own research and ask for a photo of the numbers on the back of the wheel.
The real issue is with the rear wheels and the length of the axle spindle to be able to get the center cap to fit correctly, they must be wheels that were sold on an Expedition. The F150 wheels, which can look exactly the same, but do not fit the center cap will bolt on fine as the 150 and EXPY both have 6x135 bolt patterns and a 44 mm offset. The set I just purchased has the following numbers stamped on the back. JL141007MA which will fit because they have a raised center hole to accommodate the longer rear axle spindles. The set pictured, is the first set I bought and they did not have the raised center hole and I sent them back because the vendor "ASSURED" me they work with the EXPY. Well, they did, except for the cap issue.
Here is what I think I know, because it is very confusing and this only applies to the wheel design I have pictured here. There may be other designs, but they will all have different numbers. Other numbers that "should" fit are:
MPN #
JL1Z1007FA
JL1Z1007E
JL1Z1007K
JL141007MA
Also known as:
Part #
10143 (not 10172, that was for the F150's only)
Do your own research and ask for a photo of the numbers on the back of the wheel.
Attachments
Last edited:
justinj229
Well-Known Member
Thanks for the info I currently have 275 60 18” stock - 2023 expedition xlt it’s the ones that are chrome trim black in middle but wife wants all black wheels.
Looks like 275 55 20 is stock for 2023 expeditions also but hard to find good black wheels in that size (I’m looking for take off sets)
Looks like 275 55 20 is stock for 2023 expeditions also but hard to find good black wheels in that size (I’m looking for take off sets)
justinj229
Well-Known Member
I currently have the 18” top middle but like the top right timberline and the center 20” bottom 641 “painted black” problem is how to find those online? Are those part numbers?
"641" is the Ford order code for those wheels when they are available to be ordered as a standalone option.
I like the 641s, too. If you Google "OEM wheels", you'll find all sorts of companies that buy/sell OEM wheels. Their inventory comes and goes, so you have to watch them closely to find what you want.
I like the 641s, too. If you Google "OEM wheels", you'll find all sorts of companies that buy/sell OEM wheels. Their inventory comes and goes, so you have to watch them closely to find what you want.
This should be the info for that wheel. I have only found 1 resale vendor that seems to really know what they are doing, and this is the information they display on their website. I ended up buying from them, have not installed the wheels I purchased yet.
Ford Expedition Wheel Rim Gloss Black HOL.10438-BBB-GLOSS-A
2022-2024 | Ford | Expedition | 18x8.5 | 6-135 | 6 Y-SPOKE | OEM (Wheels)
| SKU | HOL.10438-BBB-GLOSS-A |
|---|---|
| Part Number | 10438 |
| Products Type | Factory OEM Wheels |
| Process | Brand New Powder Coat Finish |
| Finish | GLOSS BLACK |
| Make | FORD |
| Model | EXPEDITION |
| Start year 1 | 2022 |
| End year 1 | 2024 |
| Wheel Size | 18x8.5 |
| Offset | 44mm |
| Hub Bore | 87.1 |
| Bolt Pattern | 6-135 |
| Caps and Sensors | Center Caps Inserts and TPMS Sensors (Not Included) |
| Style | 6 Y-SPOKE |
| Wheel Note | *Image shows the structual look only. Not the color or finish. |
| MPN# | NL1Z-1007-C, NL14-1007-CA |
If you want to stick with 18" wheels, you could use some from other model years too. I also looked at this place, not sure how reputable, knowledgeable they are but this would be a super reasonable set of wheels!
2021 Ford Expedition 18" OEM Wheel Rim W10141DC
This is a 18" OEM Wheel Rim. This is an aluminum wheel with a diameter of 18" and a width of 8.5. This wheel has 6 lug holes and a bolt pattern of 135mm. The offset of this rim is 44mm. The corresponding OEM part number(s) for this rim is JL141007GA; JL14GA; JL1Z1007F. This wheel is definitely...
autorimshop.com
Last edited:
Golfcart Tim
New Member
Attachments
justinj229
Well-Known Member
Just sent you a PM
Similar threads
