Fuel zephyr wheels 20.mm

[julijn]

Its a long shot since they are new but does anyone have these yet..thinking about it...would love to see them first...would 20mm offset work?i have the ready lift kit would do 35s....any input would be greatly appreciated.. http://www.fueloffroad.com/wheel/11725/fuel-1-piece-wheels-zephyr-d633/?finishID=12&lugs=6

 

[16plati]

Its a long shot since they are new but does anyone have these yet..thinking about it...would love to see them first...would 20mm offset work?i have the ready lift kit would do 35s....any input would be greatly appreciated.. View attachment 29810 http://www.fueloffroad.com/wheel/11725/fuel-1-piece-wheels-zephyr-d633/?finishID=12&lugs=6

Looks like a b***h to clean. Readylift will allow a max 35/11.50 wide on OEM +44 offset

+20s means you will be kicking those tires out ~15/16” more than your +44s. Should be ok. I have the Readylift 3/2 on my 16 with 35/11.50/20s and they fit perfectly. But... the lift pulls the tires into the wheel wells too much. So thanks to BORA, they stick out 1.25” farther now.

3/2 with 35/11.50/20 +44 OEM


Same setup but with 1.25” adapters installed. Basically what a +12 would look like

 

[Adam Huskins]

I have the Readylift 3/2 and 35x12.5x20’s on +18 offsets on mine. Minor trim of lower front fender liner.
But, I have flares and it fills them out nicely.





Sent from my iPhone using Tapatalk

 

[Stevens4x]

Looks like a b***h to clean. Readylift will allow a max 35/11.50 wide on OEM +44 offset

+20s means you will be kicking those tires out ~15/16” more than your +44s. Should be ok. I have the Readylift 3/2 on my 16 with 35/11.50/20s and they fit perfectly. But... the lift pulls the tires into the wheel wells too much. So thanks to BORA, they stick out 1.25” farther now.

3/2 with 35/11.50/20 +44 OEM
View attachment 29813

Same setup but with 1.25” adapters installed. Basically what a +12 would look like
View attachment 29812

Hey- Did you have to mod anything? Do your tires rub at all? Thanks!